Design of Room Lighting Electric Power Savings Using PIR Sensor

Arnoldus V. Kokaa, Aries Boedi Setiawan, Mochammad Viky Aditya, Bayhaky Bayhaky

Abstract


The current lighting system is one of the big electricity usage. With the lights, human activities can last 24 hours non-stop. The higher the intensity of activities that require lighting, the energy used is also getting higher and higher. For that we need to try to save energy in lighting system. In general, lighting arrangements only use the principle on or off regardless of activity in the room. This leads to inefficient use of electrical energy. From that thought then designed to build room power saving lamps by using PIR sensor is more efficient because the igniter lights the room is controlled automatically. The existence of the subject will be detected using a Passive Infra Red sensor (PIR) applied by the microcontroller. The MOSFET driver is used as a switch. So the lights will light up brightly as long as there are subjects in the room, and the lights will dim back when the subject leaves the room. The subject is focused on humans. With the creation of this system is expected to save electrical energy.

References


Anonim, 2012, Indonesia yang terboros Pemakaian Listrik Di ASEAN,Alpen Steel Forum, Renewable Energy.

Malvino, Albert Paul. 1996. Prinsip-prinsip Elektronika Edisi Ke 2. Jakarta :Erlangga.

Marnis, Y., 2011, Implementasi Sensor PIR (Passive Infrared Receiver) KC7783R

pada Sistem Pengaman Ruangan Berbasis Mikrokontroler dengan

Keluaran Suara,Tesis, FMIPA, Universitas Andalas, Padang

Elex Media Komputindo. Tri Wibowo.’Sensor Kehadiran Orang Sebagai Saklar Otomatis Suatu Ruangan’.Semarang. Teknik Elektro Fakultas Teknik UNDIP 2011.

Winoto, Ardi. 2008. Mikrokontroler AVR ATmega8/16/32/8535 dan

Pemrogramannya dengan Bahasa C pada Win AVR. Bandung :

Informatika.

Kusumo, R.P., dan Adityo, D., 2008, Sistem Deteksi Orang Dalam

Ruangan Untuk Mengatur Nyala Lampu Ruang Kuliah Yang

Dipantau Secara Terpusat Dalam Ruang Kontrol, Fakultas Teknologi Industri, Institut Teknologi Sepuluh Nopember, Surabaya.

Gifson, A. S., 2009, “Sistem Pemantau Ruang Jarak Jauh Dengan Sensor Passive Infrared Berbasis Mikrokontroler AT89S52”, Telkomnika V0l. 7, No. 3, Jakarta Selatan This entry was posted on 15 February 2012, in Electronic Engineering and

tagged ATmega8535, CV AVR, LCD 2x16, LCD Karakter, Mikrokontroler, Pemrograman Bahasa C.

Kurniawan, A. B., 2011, “Perencanaan dan Pembuatan Saklar Elektronik

Lampu Penerangan Hemat Energi”, Fakultas Teknologi Industri,

Universitas Pembangunan Nasional “Veteran”, Surabaya

Ali, W. 2008. Rancang Bangun Sistem Pintu Otomatis Berbasis Mikrokontroler

AT89S51 Dengan Menggunakan Sensoe PIR KC7783R. Tesis.

Universitas Andalas. Padang

Iswanto. 2008. Desain dan Implementasi Mikrokontroler ATMega 8535 dengan

Bahasa Basic. Yogyakarta : Gava Media.


Full Text: PDF

Refbacks

  • There are currently no refbacks.