Email this article 
DESIGN HORIZONTAL AXIS WIND TURBINE WITH THREE BLADES
Abstract
The use of energy, especially electrical energy in need once by the public. Lots of alternative energy in Indonesia that can be utilized to generate electrical energy. One of them is wind energy. Wind energy is easy to get especially in coastal areas. Electrical energy is not solely produced by nature. So to take advantage of the wind in need of a tool that can work and produce electricity well. Tools that can be used are windmills. One of them is Horizontal Axis Wind Turbine with Three Blade which will drive the gear box and then rotate the generator. In this wind turbine the material used to make the blade is mindi wood. The wood is quite strong, lightweight and easily obtained by size. The experimental results at a wind speed of 4 - 6 m/s with an angle of 600 at rpm gain on a generator of about 1300 with an output of 15.92VDC
DOI : https://doi.org/10.26905/jeemecs.v1i1.2076
Keywords
Wind Energy, HAWT, Blade, Gear box, generator magnet permanent
Full Text:
PDFReferences
Desna, H. Optimasi Desain Blade Pada Turbin Angin Poros Horizontal untuk memenuhi Kebutuhan Daya Pada Squid Fishing Vessels,; Institut Teknologi 10 November. Surabaya, 2008
Ramdani, A. dkk. Rancang Bangun Turbin Angin Sumbu Horizontal Kapasitas 1000 watt, Universitas Diponegoro. Semarang. 2009
Hendra, W. Rancang Bangun Pembangkit Listrik Turbine Angin Horizontal,; Politeknik Negeri Madiun. Madiun, 2016
DOI: https://doi.org/10.26905/jeemecs.v1i1.2076
Refbacks
- There are currently no refbacks.
JEEMECS (Journal of Electrical Engineering, Mechatronic and Computer Science) |
Mailling Address:
|
