PORTABLE WIND TURBINES USES BLADE TYPE INVERSE TAPER

Dwi Lestariningtiyas, Basuki Winarno, Yuli Prasetyo

Abstract


The electrical energy is greatly needed in human’s life and even in the primary life of Indonesian. One of the renewable electrical energy resources is the wind energy which can be obtained by constructing a Wind Power Plant (PLTB, Pembangkit Listrik Tenaga Bayu). PLTB works by conversing the wind energy into electrical energy. PLTB that has been applied in Indonesia is using a permanent system with various kinds of blades. In this study, the Portable Wind Turbine is designed by using the inversed taper type blade. The Portable Wind Turbine consists of the inverse taper type wind turbine, DC dynamo, control circuit, and battery. The design begins with creating a simulation to design the turbine and control circuit. The turbine design uses Qblade and SolidWorks software for students, while the control circuit uses free version of Proteus software. The design result is a prototype which possesses a blade with 15cm and 8cm radius. The prototype testing is carried out by comparing two types of blade using various speed of artificial wind. The blade with 15cm length indicates a better result compared to the blade with 8cm. It produces a maximum voltage with the wind speed of 7m/s with 4,35volt and the current of 1,3 ampere.

DOI : https://doi.org/10.26905/jeemecs.v2i2.3162


Keywords


Electrical Energy, PLTB, Wind Turbine, Inversed Taper.

Full Text:

PDF

References


Winarno, B., & Safi'i, A. (2018). Design Horizontal Axis Wind Turbine With Three Blades. JEEMECS (Journal of Electrical Engineering, Mechatronic and Computer Science), 1(1), 17-22.

Winarno, B., Yudha, R. G. P., & Susanto, F. (2019). Performance Analysis Vertical-Axis Wind Turbine (VAWT) Turbine Convex Savonius. Research Journal of Advanced Engineering and Science, 4(1), 62-65.

Prasetyo, Y., & Hidayatullah, N. A. (2019). Analisa Karakteristik Turbin Angin Sumbu Vertikal Tipe Savonius Helius. JEECAE (Journal of Electrical, Electronics, Control, and Automotive Engineering), 4(1), 241-244.

Bachtiar,Shomad. (2017). Perancangan Dan Pembuatan Bilah Tipe Inverse Taper Menggunakan Airfoil NACA 4412 Pada Turbine Angin Sumbu Horizontal. Politeknik Negeri Madiun

Ismail Nakhoda,Yusuf dan Chorul Saleh. (2015). Rancang Bangun Kincir Angin Sumbu Vertikal Pembangkit Listrik Portabel. Teknik Elektro.Institut Teknologi Nasional Malang

Anggraini,Fitri. (2016). Pemanfaatan Energi Angin Pada Sepeda Motor Bergerak Untuk Menyalakan Lampu. Universitas Lampung

Putri,Aisha Dwike.Retno Tri Wahyuni dan Tiannur. (2014). Pemanfaatan Energi Kayuhan Sepeda Untuk Mengisi Baterai Handphone. Teknik Elektro,Politeknik Caltex Riau

Hatta,Muhammad dan Awaludin Martin. (2017). Perancangan Bilah Tipe Inverse Taper Pada Turbine Angin Berdasarkan Kondisi Angin Di Pekanbaru. Jom FTEKNIK Volume 4 No.1

Lentera Angin Nusantara. (2014). Pengenalan Teknologi Pemanfaatan Energi Angin. Lan, Tasikmalaya.




DOI: https://doi.org/10.26905/jeemecs.v2i2.3162

Refbacks

  • There are currently no refbacks.




JEEMECS (Journal of Electrical Engineering, Mechatronic and Computer Science)
Electrical Engineering Department, Faculty of Engineering



Mailling Address:

  • Address: Taman Agung Street No. 1, Sukun, Malang City, East Java, 65146, Indonesia.
  • Website: http://jurnal.unmer.ac.id/index.php/jeemecs/
  • Phone: +62 856 - 4850 - 9998 
  • Email: [email protected]


JEEMECS (Journal of Electrical Engineering, Mechatronic and Computer Science) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License Creative Commons License

Copyright ©2020 University of Merdeka Malang Powered by Open Journal Systems.