Email this article 
The Design of Automatic Powder Packaging Tools Based on Atmega 16 Microcontroller on Home industry
Abstract
In production, packaging is an essential factor. Especially if the product is in the form of food, the function of the packaging is to protect it from sunlight, dust, and other damage. There are still many who use the manual method in the home industry. The process still requires many human resources.
For this reason, the design of an automatic powder packaging device based on the Atmega 16 microcontroller was made. This tool serves to package flour (flour, sugar, and coffee) packaged automatically using a microcontroller as the brain of the device. The initial packaging method was to put the powder in each container. Then the powder will come out automatically according to the input of the type of powder and the desired weight of the operator via the keypad. Then the powder enters the dose that Loadcell has installed as a weight detector displayed on the LCD. After the weight reaches the set point, the powder will enter the package. The package that has been filled with powder will be pressed using a sealer. From the tests carried out, the percentage of success reached 70%.
Keywords
Microcontroller Atmega16;Keypad;LCD;Loadcell;Sealer
Full Text:
PDFReferences
D. T. Mareta and S. Nur, “Pengemasan Produk Sayuran Dengan Bahan Kemas Plastik Pada Penyimpanan Suhu Ruang Dan Suhu Dingin,” Pengemasan Prod. Sayuran Dengan Bahan Kemas Plast. Pada Penyimpanan Suhu Ruang Dan Suhu Dingin, vol. 7, no. 1, pg. 26–40, 2017.
B. Raharjo, “Pengepres kantong plastik otomatis berbasis mikrokontroler,” 2016.
A. Yoanda and M. Kamal, “RANCANG BANGUN SISTEM PENGEPAKAN TEPUNG SECARA OTOMATIS MENGGUNAKAN PROGAMMABLE LOGIC CONTROLLER,” vol. 2, no. 1, 2018.
M. R. Saraf, V. V Ruiwale, V. V Kulkarni, and S. M. Kulkarni, “Design and Development of Cost Effective Automatic Machine for Powder Packaging,” vol. 4, no. 4, pg. 420–424, 2016.
P. Hambir, N. Joshi, P. Karande, and A. Kolhe, “Automatic Weighing and Packaging Machine,” no. May, pg. 2129–2138, 2019.
B. N. Devi, “PLC Controlled Automatic Food Packaging Machine 1,” vol. 30, no. 1, pg. 33–36, 2015.
D. T. Laksono, “Rancang Bangun Pembuat Kopi Otomatis Berbasis Arduino Mega,” 2020.
N. Isnainin, M. Ulum, and K. Joni, “RANCANG BANGUN INDIKATOR BERAT , TEMPERATUR DAN KADAR ALKOHOL PADA PROSES FERMENTASI SINGKONG ( TAPE ) DENGAN METODE FUZZY BERBASIS MICROCONTROLLER ATMEGA 16 Nurul : Rancang Bangun Indikator Berat Nurul : Rancang Bangun Indikator Berat,” vol. 2, no. 1, pg. 8–14, 2020.
M. D. A. N. Interace, “BUKU AJAR.”
DOI: https://doi.org/10.26905/jeemecs.v5i1.5401
Refbacks
- There are currently no refbacks.
JEEMECS (Journal of Electrical Engineering, Mechatronic and Computer Science) |
Mailling Address:
|
