Analisis Sistem Antrian Gudang Cross-dock dengan menggunakan Sistem Antrian (M/M/S) Pada Industri Perakitan Mobil

Adi Fitra; Suhendra Suhendra; Tri Ngudi

doi:10.26905/jiv.v6i1.12326

Analisis Sistem Antrian Gudang Cross-dock dengan menggunakan Sistem Antrian (M/M/S) Pada Industri Perakitan Mobil

Adi Fitra, Suhendra Suhendra, Tri Ngudi

Abstract

The car assembly industry continues to grow, especially in Indonesia. Logistics is one of the fields that supports the car assembly industry such as the Cross-dock warehouse. The Cross-dock warehouse itself has a capacity limit in receiving queues of containers received in the truck unloading waiting area. Queue analysis was carried out at the Cross-dock company in the car assembly industry in Cikarang using the Queue method (M/M/S). Where the current container receiving capacity is obtained at a maximum of 12 containers per hour and the unloading capacity of 2 containers per hour will not exceed the waiting capacity for container unloading as many as 8 containers, if it is found that the arrival of containers exceeds 12 containers, it will result in the container being outside the Cross-dock system and must be outside the Cross-dock warehouse.

Abstrak

Industri perakitan mobil terus berkembang khususnnya di Indonesia. Logistik adalah salah satu bidang yang mensupport industri perakitan mobil seperti adanya gudang Cross-dock. Gudang Cross-dock sendiri mempunyai batasan kapasitas dalam menerima antrian container yang diterima di area tunggu bongkarang truk. Analisa antrian dilakukan pada perusahaan Cross-dock di Industri perakitan mobil di Cikarang dengan menggunakan metode Antrian (M/M/S). Dimana didapatkan kapasitas penerimaan container saat ini sudah maksimal dengan 12 container perjam dan kapasitas bongkaran 2 kontainer perjam tidak akan melebihi dari kapasitas tunggu bongkaran kontainer sebanyak 8 kontainer jika didapati kedatangan kontainer melebihi dari 12 kontainer maka akan mengakibatkan container berada diluar dari system Cross-dock dan harus berada di luar dari gudang Cross-dock.

Keywords

Antrian; Cross-dock; M/M/S; Kontainer

Full Text:

PDF

References

M. Sultana and K. Amilin Ibrahim, “MARKET SHARE IN PRODUCTION AND SALES OF PASSENGER VEHICLES IN ASEAN,” 2014.

Fitra adi, “Smart Logistic 4.0 in Manufacture,” Lentera Pengabdian, vol. 1, no. 2013, pp. 125–133, May 2012.

S. Kudlac, J. Majercak, and P. Majercak, “Comparison of different variants of logistics chain with the use of air transport using the software application,” Transportation Research Procedia, vol. 28, pp. 45–50, 2017, doi: 10.1016/j.trpro.2017.12.167.

F. A. Barata, “High Cost of Logistics and Solutions,” in Proceedings of the 17 th International Symposium on Management (INSYMA 2020), Paris, France: Atlantis Press, 2020. doi: 10.2991/aebmr.k.200127.083.

H. H. Purba, A. Fitra, and A. Nindiani, “Control and integration of milk-run operation in Japanese automotive company in Indonesia,” Management and Production Engineering Review, Nov. 2023, doi: 10.24425/mper.2019.128246.

P. Nieuwenhuis, “Car Manufacturing,” in The Global Automotive Industry, Wiley, 2015, pp. 41–51. doi: 10.1002/9781118802366.ch5.

G. Tresca, G. Cavone, R. Carli, A. Cerviotti, and M. Dotoli, “Automating Bin Packing: A Layer Building Matheuristics for Cost Effective Logistics,” IEEE Transactions on Automation Science and Engineering, vol. 19, no. 3, pp. 1599–1613, Jul. 2022, doi: 10.1109/TASE.2022.3177422.

R. Burdzik, M. Ciesla, and A. Sładkowski, “Cargo loading and unloading efficiency analysis in multimodal transport,” Promet - Traffic - Traffico, vol. 26, no. 4, pp. 323–331, 2014, doi: 10.7307/ptt.v26i4.1356.

S. Martinov, “Simulation Model of a Rail-Road Container Terminal Described as a Queueing System,” in Proceedings of 26th International Scientific Conference. Transport Means 2022., S. Martinov, Ed., 2022.

fitra adi, “Penentuan Titik Pabrik PT. XYZ Menggunakan Metode Center of Gravity terhadap Volume produksi dan Biaya Pengiriman Barang ke Customer,” Jurnal TeknikIndustri, vol. 4, no. 2023, pp. 32–37, 2023.

A. Shahpanah, A. Hashemi, G. Nouredin, S. M. Zahraee, and S. A. Helmi, “Reduction of Ship Waiting Time at Port Container Terminal Through Enhancement of the Tug/Pilot Machine Operation,” J Teknol, vol. 68, no. 3, May 2014, doi: 10.11113/jt.v68.2931.

E. Sanggala, E. Mulyati, N. Rahma, and D. Putri, “ANALISIS SISTEM ANTRIAN UNTUK MENENTUKAN JUMLAH OPERATOR ANGKUT YANG OPTIMUM DENGAN METODE TEORI ANTRIAN UNTUK MEMINIMALKAN WAKTU KETERLAMBATAN PENGIRIMAN KANTONG SURAT DAN BARANG PRIORITAS DI PT. POS INDONESIA (PERSERO) KANTOR MAIL PROCESSING CENTER (MPC) SEMARANG 50400,” Jurnal Logistik Bisnis, vol. 09, no. 02, 2019, [Online]. Available: http://ejurnal.poltekpos.ac.id/index.php/logistik/index

R. Hutapea, “Analisis Waktu Proses Bongkar ANALISIS WAKTU PROSES BONGKAR MUAT BARANG DENGAN MENGGUNAKAN TEORI ANTRIAN,” 2011.

R. B. Cooper, “Queueing theory,” in Proceedings of the ACM ’81 conference on - ACM 81, New York, New York, USA: ACM Press, 1981, pp. 119–122. doi: 10.1145/800175.809851.

A. A. Borovkov, Stochastic Processes in Queueing Theory. New York, NY: Springer New York, 1976. doi: 10.1007/978-1-4612-9866-3.

DOI: https://doi.org/10.26905/jiv.v6i1.12326