Analisis Pengaruh Penggunaan Cooler Peltier Terhadap Performa Ponsel saat Menjalankan Game Mobile Legends : Bang Bang dengan Variasi Resolusi Grafik

I Made Yudi  Dharmawan; Made Sutha Yadnya; Djul Fikry Budiman

doi:10.26905/jasiek.v8i1.17047

Authors

I Made Yudi Dharmawan
Made Sutha Yadnya Universitas Mataram
Djul Fikry Budiman Universitas Mataram

DOI:

https://doi.org/10.26905/jasiek.v8i1.17047

Keywords:

Frame Rate, Performance, Peltier Cooler, Resolution, Thermoelectric

Abstract

This research covers the measurement and analysis of the effect of peltier coolers on mobile phone performance while playing Mobile Legends: Bang Bang. System stability control conditions can lower the Frames per Second (FPS) in the image display (lag). Direct data collection is in the form of quantitative experimental. The use of two mid-range phones was tested with a variety of graphics resolutions (Standard and HD), durations of 10, 15 and 20 minutes, as well as conditions with and without coolers. Each combination of treatments was repeated 30 times. The data was analyzed by comparing the average temperature drop and the FPS increase, so that a deep correlation value (R²) was obtained, a term used to measure the correlation between temperature and FPS. The results showed that peltier coolers were effective in lowering the temperature significantly. On Xiaomi, the average temperature drop is 9,24°C (Standard) and 12,02°C (HD), with an increase in FPS of 0,23 and 14,08. On Infinix, the temperature drop is 9.19°C (Standard) and 10.92°C (HD), with an increase in FPS of 0.011 and 1.023. An R² value close to +1 indicates a strong correlation between a decrease in temperature and an increase in FPS.

Downloads

Download data is not yet available.

References

[1] Prakash, A., Amrouch, H., Muhammad Shafique, Tulika Mitra, & Jorg Henkel. (2016). “Improving Mobile Gaming Performance through Cooperative CPU-GPU Thermal Management”. Retrieved from http://dx.doi.org/10.1145/2897937.2898031

[2] Shilpa, M. K., Md Abdul Raheman, Abdul Aabid, Muneer Baig, R. K. Veeresha & Nagesh Kudva. (2022). “A Systematic Review of Thermoelectric Peltier Devices: Applications and Limitations”. DOI: 10.32604/fdmp.2022.020351

[3] Hernandez, M., Kim, S., & Park, J. (2021). “Performance Analysis of Thermoelectric Cooling in Portable Electronic Devices”. Journal of Thermal Science and Engineering Applications, 13(4), 041010.

[4] Saraswati, N., & Yulianto, A. (2020). “Analisis Pengaruh Suhu terhadap Kinerja Prosesor pada Smartphone Android”. Jurnal Teknologi dan Sistem Komputer, 8(3), 145–152.

[5] Jeyavarthni, M., Dr. D. Ravindran, R. Stephan, & M. Vasantha Kanesh. (2017). “Heat Reducing Using Peltier Effect on Smart Phones”. International Journal of Scientific Research in Computer Science, Engineering and Information Technology, 2(4).

[6] Lee, Y., Kim, E., & Shin, K. G. (2017). “Efficient Thermoelectric Cooling for Mobile Devices”.

[7] Saputra, R. (2016). “Analisis Thermal Noise Akibat Radiasi Gelombang Elektromagnetik pada Perangkat Telekomunikasi Wireless”. Universitas Brawijaya. Retrieved from http://repository.ub.ac.id/id/eprint/144130

[8] Xiaomi Indonesia. Standar Suhu Baterai Ponsel Xiaomi. Retrieved from https://www.mi.co.id/id/support/faq/details/KA-09796

[9] Infinix Indonesia. Standar Suhu Baterai Ponsel Infinix. Retrieved from https://id.infinixmobility.com/gt-20-pro

[10] International Telecommunication Union (ITU-R). (2015). “Parameter values for ultra-high definition television systems for production and international programme exchange”. BT Service, Broadcasting service (television).

[11] Chalimah, S., R. Setyobudi, R.B Anggoro, A. Sadrina, C.M. Putri, M.H.B. Satria, E.S. Buana, & A.R. Rizqullah. (2024). “Peltier System Performance Analysis on Portable Refrigeration Machines: 30 Minute Experimental Case Study”. Biomedical and Mechanical Engineering Journal (BIOMEJ).

[12] Pratama, D. R., & Nugroho, B. (2022). “Penerapan Modul Peltier sebagai Sistem Pendingin Tambahan pada Smartphone Gaming”. Jurnal Elektro dan Komputer, 10(2), 88–95.

[13] Sadiku, M. N. O., & Musa, S. M. (2020). “Thermoelectric Cooling Technology for Electronics”. IEEE Potentials, 39(5), 30–33.

[14] M. S. Yadnya, S. M. Sasongko, dan L. A. Wahyudi, “Pengukuran performansi game on line di daerah rural dalam variasi waktu dan karakter hero pada Mobile Legend Bang Bang,” DIELEKTRIKA, vol. 7, no. 1, hlm. 25–29, Feb. 2020.

[15] L. A. Wahyudi, M. S. Yadnya, dan S. M. A. Sasongko, “Analisis performansi jaringan 4G XL Axiata pada daerah rural dalam game Mobile Legends: Bang Bang,” Skripsi, Jur. Tek. Elektro, Univ. Mataram, Mataram, 2020.

[16] M. R. Alfarizqa, M. S. Yadnya, dan A. Zainuddin, “Analysis of the use of provider and Mi-Fi devices on game performance in Mobile Legends: Bang Bang ranked mode,” J. Penelit. Pendidik. IPA, vol. 11, no. 4, hlm. 1169–1178, Apr. 2025.

[17] Peter A. Kara., Werner Robitza, Nikolett Pinter, Maria G, Martini, Alexander Raake, & Aniko Simon. (2019). “Comparison of HD and UHD video quality with and without the influence of the labeling effect”. Retrieved from https://doi.org/10.1007/s41233-019-0027-3

[18] Kusuma A. P. B., & Riwinoto R. (2024). “Analisis Perbandingan Teknik Optimasi Occlusion Culling & LOD Group Pada Game VR Mahakarya Vokasi Dengan Perangkat VR Oculus Quest 2”. Journal of Applied Multimedia and Networking (JAMN), Vol.8, No.2, 01-12

[19] J. R. B. Bantock, B. M. Al-Hashimi, and G. V. Merrett, “Mitigating interactive performance degradation from mobile device thermal throttling,” IEEE Embedded Syst. Lett., vol. 13, no. 1, pp. 5–8, Mar. 2021, doi: 10.1109/LES.2020.2991327.

[20] M. Bensafi et al., “Experimental investigation of cooling performance in electronic instruments,” Therm. Sci., vol. 27, no. 4B, pp. 3445–3455, 2023.