Sistem Otomatis Penggerak Lesan Tembak Untuk Latihan Teknik Tempur Cepat Dengan Metode PID
DOI:
https://doi.org/10.26905/jasiek.v3i2.8373Keywords:
DC Motors, Radar Sensors, Microwaves, Lora Communications 1278, Arduino UNOAbstract
Rapid fighting techniques are shooting at materials that require concentration, accuracy, readiness and speed of shooting at targets, which must be performed by a VNI soldier. Soldiers should run out to the firing range at 80, 70 and 50 meters and immediately shoot at moving/underwater targets. What the author wants to do is to perform TTC exercises automatically using a DC motor in the PID method, using sensors at each shooting distance to control the motor on Lesan, so that it does not require personnel to move the target to move or lower Lesan, with the aim help avoid loss of personnel in the event of an accident, during training and more efficient execution of exercises.References
F. H. P. Yudho, L. Limudin, M. Aryani, A. Dimyati, R. R. Julianti, and R. Iqbal, “Analisis keterhubungan daya ledak otot lengan dengan keterampilan menembak bola tangan,†Multilater. J. Pendidik. Jasm. dan Olahraga, vol. 21, no. 1, pp. 87–97.
MUTIA, “STRATEGI KEPEMIMPINAN OTORITER DALAM UPAYA MENINGKATKAN DISPLIN KERJA PRAJURIT TNI-AD JENJANG BINTARADI KORAMIL 0201/BS HAMPARAN PERAK.†2022.
Raharjo, K. Eko, and A. Imam, “Rancang Bangun Tracking Arah Tembakan Menggunakan Sensor Posisi Berbasis PID Design and Implementation of the Shot Direction Tracking System Using a PID-Based Position Sensor,†TELKA-Jurnal Telekomun. Elektron. Komputasi dan Kontrol, vol. 7, no. 1, pp. 43–48, 2021.
Ip. E. Yulianto, “ANALISIS KOMUNIKASI DATA PADA LESAN TEMBAK UNTUK LATIHAN TEKNIK TEMPUR CEPAT BERBASIS LORA 1278,†MULTITEK Indones., vol. 13, no. 2, pp. 120–127, 2019.
M. Telaumbanua, Buku Ajar Pengantar Teknologi Instrumentasi Teknik Pertanian. Penerbit NEM, 2021.
R. Wulandari, “Analisis QoS (Quality of Service) pada jaringan internet (studi kasus: upt loka uji teknik penambangan jampang kulon–lipi),†J. Tek. Inform. dan Sist. Inf., vol. 2, no. 2, 2016.
D. S. FH, A. Rabi, and J. Saputra, “Implementasi Kontrol Pid pada Pergerakan Laras Mortir 81mm Sesuai dengan Hasil Perhitungan Koreksi Tembakan,†Pros. SNATIF, pp. 327–334, 2017.
J. Shadiq, A. Safei, and R. W. R. Loly, “Pengujian Aplikasi Peminjaman Kendaraan Operasional Kantor Menggunakan BlackBox Testing,†Inf. Manag. Educ. Prof. J. Inf. Manag., vol. 5, no. 2, pp. 97–110, 2021.
D. İzci, S. Ekinci, and S. Ekinci, “Comparative performance analysis of slime mould algorithm for efficient design of proportional–integral–derivative controller,†Electrica, vol. 21, no. 1, pp. 151–159, 2021.
Zahra, D. Darjat, and R. Darpono, “Sistem Pengendali Sasaran Tembak DART (Disappear Automatically Retaliatory Target) Menggunakan Gelombang Radio,†Transm. J. Ilm. Tek. Elektro, vol. 10, no. 3, pp. 131–137.
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
The journal allow the authors to hold the copyright without restrictions and allow the authors to retain publishing rights without restrictions.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
