Sistem Monitoring dan Pengisian Daya Baterai Pada Sepeda Motor Listrik Secara Adaptive

Authors

  • Wilibrodus Wanggur Mboi Universitas Merdeka Malang
  • Nachrowie Nachrowie Universitas Merdeka Malang
  • Yandhika Surya Akbar Gumilang Universitas Brawijaya
  • Resi Dwi Jayanti Kartika Sari Universitas Brawijaya

DOI:

https://doi.org/10.26905/jasiek.v3i2.8375

Keywords:

Battery, Adaptive Control, Microcontroller, Atemga8535, Arduino

Abstract

Development of the automotive world, more and more fuel oil is required to refuel cars. As the price of oil continues to rise, the automotive industry has begun to develop non-petroleum fueled motorcycles, one of which is electric motorcycles. Although it is currently very difficult to completely replace fossil fuels, the introduction of renewable energy sources will be very important to start immediately. One of them is a system to reuse an existing battery charging system on an electric motor in turn, where, when the engine is running, the charging system uses a DC generator located on the electric motor. And when the engine stops, the charging system uses the current source from PLN.

References

M. E. Arianto, A. Daryanto, B. Arifin, and N. Nuryartono, “Analisis harga minyak sawit, tinjauan kointegrasi harga minyak nabati dan minyak bumi,†Jurnal Manajemen & Agribisnis, vol. 7, no. 1, pp. 1–15, 2010.

M. Ngafifi, “Kemajuan teknologi dan pola hidup manusia dalam perspektifsosial budaya,†Jurnal Pembangunan Pendidikan: Fondasi dan Aplikasi, vol. 2, no. 1, 2014.

F. Andreas, D. Triyanto, and T. Rismawan, “Rancang Bangun Sistem Kontrol Dan Pemonitoran Lampu Rumah Dengan Smartphone Android Berbasis Sms Gateway Dan Mikrokontroler Atmega16,†Coding Jurnal Komputer dan Aplikasi, vol. 3, no. 2, 2015.

E. N. I. Nuzula, “Perancangan dan Pembuatan Alat Ukur Kekeruhan Air Berbasis Mikrokotroler ATMega 8535,†Jurnal Sains Dan Seni Pomits, vol. 2, no. 1, pp. 1–5, 2013.

A. Lubis, “Energi terbarukan dalam pembangunan berkelanjutan,†Jurnal Teknologi Lingkungan, vol. 8, no. 2, 2007.

S. Syafriyudin and D. P. Purwanto, “Oven pengering kerupuk berbasis mikrokontroler ATmega 8535 menggunakan pemanas pada industri rumah tangga,†Jurnal Teknologi, vol. 2, no. 1, pp. 70–79, 2009.

D. Setyaningrum, R. Effendi,and A. Fatoni, “Desain dan Implementasi ModelReferenceAdaptive Control untuk Pengaturan Tracking Optimal Posisi Motor DC,†Jurnal Teknik POMITS, vol. 1, no. 1, pp. 1–6, 2012.

P. Kestabilan, P. Sistem, and W. Leonard, “1 ), 2 ), 3 )â€.

N. Effendi, A. K. Jahja, and S. Purnama, “PEMBUATAN DAN KARAKTERISASI SEL BATERAI SEKUNDER BAHAN SUPERIONIK AeRbAg4I1RbI3,†Jurnal Sains Materi Indonesia, vol. 1, no. 2, pp. 26–31, 2000.

Y. C. Saghoa, S. R. U. A. Sompie, and N. M. Tulung, “Kotak Penyimpanan Uang Berbasis Mikrokontroler Arduino Uno,†Jurnal Teknik Elektro dan Komputer, vol. 7, no. 2, pp. 167–174, 2018.

H. D. Surjono, Elektronika: teori dan penerapan. Cerdas Ulet Kreatif Publisher, 2011.

R. Yuliana, M. Umar, and S. Syahreza, “The Design of Multifunctional Emergency Light System,†Journal of Aceh Physics Society, vol. 6, no. 1, pp. 40–43, 2017.

I. Y. Basri and D. Irfan, “Komponen Elektronika,†2018.

JASIEK Vol 03 NO.02 DESEMBER 2021

Downloads

Published

2021-12-21

Issue

Vol. 3 No. 2 (2021): DESEMBER 2021

Section

Articles

License

Authors who publish with this journal agree to the following terms:

The journal allow the authors to hold the copyright without restrictions and allow the authors to retain publishing rights without restrictions.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.