Implementasi Metode PID Untuk Pengaturan Kecepatan Motor DC Pada Mesin Pencacah Bunga Rosella Kering Untuk Pengolahan Teh Rosella

Delila Cahya Permatasari, Nara Agata Abiwindraya, Wahyu Dirgantara, Nachrowie Nachrowie

Abstract


In Indonesia Rosella Flowers are used as herbal tea. The process of brewing Rosella Tea is brew 3 – 4 dried rosella petals with 200ml hot water. This brewing process takes a long time from 10 minute or 15 minute. One of way to improved is crushing the rosella flower to little shape with apply PID method. This machine use Atmega32 as controller, speed sensor, laser sensor, and DC Motor as actuator. The working principle of this machine is to stabilize DC motor speed, effective procces is at 900 RPM, in this speed takes 07 minutes 15 seconds to finished the process, and laser sensor has not detected rosella flower to crushing the system will turn off automatically. With percentage overshoot  10.2 %,  settling time 245 seconds, and biggest error of speed sensor is 2.6 % . The reuslt from speed sensor will display at LCD 2*16 to make easily to analysis.

Keywords


PID , Rosella Flower, Speed Sensor

Full Text:

PDF

References


D. Cahya, E. Mandayatma, and M. Fauziyah, “Implementasi Metode PI Untuk Pengaturan Suhu Pada Proses Pengeringan Kelopak Bunga Rosella,” J. Elkolind J. Elektron. dan Otomasi Ind., vol. 7, no. 3, pp. 9–14, 2021.

R. Hayati, “Pengaruh Suhu Pengeringan Terhadap Mutu Rosella Kering (Hibiscus sabdariffa),” J. Floratek, vol. 6, no. 1, pp. 1–7, 2011.

H. Maryani and L. Kristiana, Khasiat & Manfaat Rosela. Agromedia, 2005.

D. S. Usman and S. Winarti, “Karakteristik dan Aktivitas Antioksidan Rosela Kering (Hibiscus sabdariffa L.)(Characteristics and Antioxidant Activity Dried Rosella (Hibiscus sabdariffa L.)),” J. Teknol. Pangan, vol. 9, no. 2, 2016.

K. Ogata, Modern control engineering, vol. 5. Prentice hall Upper Saddle River, NJ, 2010.

AnthoniusStephanus, dkk. 2003. STUDI KARAKTERISTIK MOTOR DC PENGUAT LUAR TERHADAP SIKAT. Jurnal Teknik Elektro Vol. 3, No. 1. Fakultas Teknologi Industri, Jurusan Teknik Elektro, Universitas Kristen Petra.

Mangera, Paulus dan Daud Andang Pasalli. 2013. ANALISIS MENGGUNAKAN PEMODELAN UNTUK PENGENDALIAN MOTOR LISTRIK STUDI KASUS MOTOR 1750 RPM/60 HP/240 Volt. Jurnal Ilmiah Mustek Anim Ha Vol.2 No. 3. Fakultas Teknik, Jurusan Teknik Elektro Universitas Musamus Merauke.

Swamardika,Ida Bagus Alit, dkk. 2015. RANCANG BANGUN ROBOT 6WD SEBAGAI ALAT PENDETEKSI KEBOCORAN GAS BERBASIS KOMUNKASI WIRELESS Xbee-PRO SERIES 1 60mW. JTE 1693-2951




DOI: https://doi.org/10.26905/jasiek.v4i1.8391

Refbacks

  • There are currently no refbacks.



JASIEK(Jurnal Aplikasi Sains, Informasi, Elektronika dan Komputer)
Department of Electrical Engineering, Universitas Merdeka Malang



Image result for address iconTaman Agung Street No. 1, Sukun, Malang Kota, Jawa Timur, 65146, Indonesia
Image result for address blue iconjasiek@unmer.ac.id
Image result for address blue icon0822-3333-4114
@jasiekunmer

Supported By: