Purwarupa Sistem Monitoring Kemiringan Menara Base Transceiver Station (BTS) Berbasis Arduino sebagai Solusi Maintenance Menara

Authors

  • Sam Benyamin Universitas Merdeka Malang
  • Nachrowie Nachrowie Universitas Merdeka Malang
  • Wahyu Dirgantara Universitas Merdeka Malang

DOI:

https://doi.org/10.26905/jasiek.v4i2.9174

Keywords:

Arduino, Base Transceiver Stations, Prototype, Slope

Abstract

Menara Base Transceiver Station (BTS) is a telecommunications station whose main function is to facilitate wireless communication between communication devices (clients) and network operators. BTS towers are usually built in densely populated residential areas, due to distributing telecommunications networks. Because it was built in a densely populated settlement, it is necessary to pay attention to the feasibility maintenance of the BTS tower. BTS tower maintenance is intended so that BTS towers can work optimally and reduce the risk of collapsing. The prototype will be made with several components, namely the MPU-6050 sensor, Arduino Uno and LCD. MPU-6050 to detect the tilt of the BTS tower. After 10 tests of pitch and roll angles, the prototype of the BTS tilt has an average error of 1.077 for pitch angle and 1.703 for roll angle. These results are still valid in monitoring the angle of inclination of the BTS

References

H. Hamuda, “Perencanaan Kebutuhan Base Transceiver Station (BTS) Dan Optimasi Penempatan Menara Bersama Telekomunikasi,†2014.

E. A. Mamarimbing, B. D. Handono, and M. D. J. Sumajouw, “PERENCANAAN STRUKTUR TOWER BTS TIPE SELF-SUPPORTING TOWER,†JURNAL SIPIL STATIK, vol. 8, no. 5, 2020.

U. Saragih, “Penggantian Kerugian Bagi Masyarakat Yang Terkena Dampak Buruk Tower BTS,†2019.

“Tower BTS Roboh dan Timpa Kontrakan, Telkomsel Perbaiki Rumah yang Rusak Halaman all - Kompas.com.†https://megapolitan.kompas.com/read/2022/03/22/15523821/tower-bts-roboh-dan-timpa-kontrakan-telkomsel-perbaiki-rumah-yang-rusak?page=all (accessed Dec. 06, 2022).

A. Windharto and A. Setiawan, “Multi operator BTS aesthetic tower design for metropolitan city,†in Proceedings of the 1st CIRP Industrial Product-Service Systems (IPS2) Conference, 2009.

Y. E. Simorangkir, “PERTANGGUNGJAWABAN HUKUM PEMILIK TOWER TELEKOMUNIKASI TERHADAP PEMILIK BANGUNAN ATAS TIMBULNYA KERUGIAN AKIBAT FORCE MAJEURE (STUDI PUTUSAN MA RI NO. 1144K/PDT/2012),†2017.

“Menengok Bukit Tempat Telkomsel Dilahirkan.†https://tekno.kompas.com/read/2019/11/28/14220047/menengok-bukit-tempat-telkomsel-dilahirkan (accessed Nov. 08, 2022).

B. Firman, “Implementasi Sensor IMU MPU6050 Berbasis Serial I2C pada Self-Balancing Robot,†Jurnal Teknologi Technoscientia, pp. 18–24, 2016.

A. A. Rafiq, W. N. Rohman, and S. D. Riyanto, “Development of a simple and low-cost smartphone gimbal with MPU-6050 sensor,†Journal of Robotics and Control (JRC), vol. 1, no. 4, pp. 136–140, 2020.

“Mengakses Sensor MPU-6050 (Accelerometer dan Gyroscope) Menggunakan Arduino – Blog elektro code.†https://elektrocode2018.wordpress.com/2020/02/26/mengakses-sensor-mpu-6050-accelerometer-dan-gyroscope-menggunakan-arduino/ (accessed Dec. 04, 2022).

Downloads

Published

2022-12-28

Issue

Vol. 4 No. 2 (2022): DESEMBER 2022

Section

Articles

License

Authors who publish with this journal agree to the following terms:

The journal allow the authors to hold the copyright without restrictions and allow the authors to retain publishing rights without restrictions.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.