Implementasi Mikrokontroler ESP8266 sebagai Sensor Berat dan Jumlah Orang pada Beban Jembatan

Sri Aji Eka Mahendra, Subairi Subairi, Nachrowie Nachrowie, Delila Cahya Permatasari, Sulistiyanto Sulistiyanto, Syifaul Fuada

Abstract


Damage to the bridge resulted in disruption of the activities of residents who want to cross the bridge. Damage to the bridge is not only due to problems with the infrastructure but can also be caused by humans, one of which is due to excess capacity on the bridge so that the construction of the bridge cannot hold or accommodate many people resulting in the bridge collapsing and resulting in several fatalities. This research is expected to help reduce and prevent damage to the bridge structure by implementing a Load Sensor using the ESP8266 microcontroller. This system is based on the Internet of Things (IoT). Based on the research results, when the condition of the bridge has no visitors, the resulting weight is 0, the display on the serial monitor "No Visitors..!!,","LOADS ARE SAFE..!!". weight of 3 kg, display on the serial monitor "LOAD SAFE.. !!,", "Number of visitors = 5", "LOAD = 3.03 kg". , a warning will appear "Visitors Full = 10", "LOAD OVER", "Number of Visitors = 10", "IN = 10", "OUT = 0", "LOAD = 6.67kg" on the Serial Monitor. the number of visitors will decrease when visitors leave the bridge.

Keywords


ESP8266; Infrared; IoT; Jembatan Timbang; load cell

Full Text:

PDF

References


A. I. Ubay, S. A. Putra, and A. Syahrina, “Perancangan Weigh In Motion Untuk Sistem ISSN 2685-497X Jurnal Aplikasi Sains, Informasi, Elektronika dan Komputer 23 Vol. 5, No. 1, Juni 2023

Wibawa, M. S., Ubay, A. I., Putra, S. A., & Syahrina, A. (2020). Integrasi Sistem Pengawasan Kesehatan Jembatan dengan Sistem Pengawasan Lalu Lintas. Jurnal Nasional Teknik Elektro Dan Teknologi Informasi, 9(2), 138-147.

Merlyn Thomas dan Laurence Peter, “‘Saya selamat, tapi adik saya masih belum ditemukan’ - cerita saksi mata jembatan gantung ambruk di Gujarat,” BBC News, 2022. [Online]. Available: https://www.bbc.com/indonesia/dunia-63451928

D. Raposo, A. Rodrigues, S. Sinche, J. Sá Silva, and F. Boavida, “Industrial IoT monitoring: Technologies and architecture proposal,” Sensors, vol. 18, no. 10, p. 3568, 2018.

P. D. P. Adi, A. Kitagawa, A. Rabi, N. Nachrowie, and R. Arifuddin, “Low-Power and Lossy Networks of Wireless Sensor Networks with Protocols Algorithm Comparison,” J. Electr. Eng. Mechatron. Comput. Sci., vol. 3, no. 1, pp. 11–24, 2020.

Y. S. A. Gumilang, M. S. Hadi, and D. Lestari, “Stopkontak Pintar Berbasis Internet of things Sebagai Solusi Manajemen Energi Listrik Dengan Menggunakan Aplikasi Android,” JASIEK (Jurnal Apl. Sains, Informasi, Elektron. dan Komputer), vol. 4, no. 2, 2022.

P. Gokhale, O. Bhat, and S. Bhat, “Introduction to IOT,” Int. Adv. Res. J. Sci. Eng. Technol., vol. 5, no. 1, pp. 41–44, 2018.

Ramdani, A. M., Basjaruddin, N. C., & Rakhman, E. (2018, October). Simulasi Jembatan Buka Tutup Otomatis Berbasis IoT Menggunakan Metode Sensor Fusion. In Prosiding Industrial Research Workshop and National Seminar (Vol. 9, pp. 22-27).

I. Suhendra and W. S. Pambudi, “Aplikasi load cell untuk otomasi pada depot air minum isi ulang,” J. Sains dan Inform., vol. 1, no. 1, pp. 11–19, 2015.

R. Kurnia, R. Firdaus, L. Lufti, and M. H. Anshor, “Otomatisasi Sensor Load Cell Untuk Mengatasi Overload Kendaraan,” J. Nas. Tek. Elektro, pp. 81–88, 2019




DOI: https://doi.org/10.26905/jasiek.v5i1.9950

Refbacks

  • There are currently no refbacks.



JASIEK(Jurnal Aplikasi Sains, Informasi, Elektronika dan Komputer)
Department of Electrical Engineering, Universitas Merdeka Malang



Image result for address iconTaman Agung Street No. 1, Sukun, Malang Kota, Jawa Timur, 65146, Indonesia
Image result for address blue icon[email protected]
Image result for address blue icon0822-3333-4114
@jasiekunmer

Supported By: