Pengukuran ketelitian gerak meja machining center berbasis laser interferometer

Authors

  • Darto Darto Faculty of Mechanical Engineering, University of Merdeka Malang

DOI:

https://doi.org/10.26905/jp.v13i2.7023

Keywords:

Laser interferometer, Machining center, Positioning, Straight

Abstract

We tested the accuracy of the machining center table movement in the X-axis direction using laser interferometer-based measurements. The accuracy of the machining center table movements tested included accuracy in positioning, accuracy in angular motion, and accuracy in the straightness of motion. By using a laser interferometer to measure the accuracy of machining center motion, it is hoped that accurate results can be obtained and can be carried out in a relatively short time. The accuracy of the measurement technique with a laser interferometer depends on the stability of the wavelength of the laser beam. The stability is influenced by environmental factors, namely pressure, temperature, and humidity.

References

Bagiasna, K. (2002). Pengantar Pengujian Ketelitian Geometrik Mesin Perkakas. Laboratorium Teknik Produksi dan Metrologi Industri, ITB, Bandung.

Bagiasna, K. (1997) Pitch accuracy of a thread cut using a single point cutting tool. Ph.D. Dissertation. Katholieke Universiteit Te Leuven.

Schlesinger, G. (1970). Testing Machine Tools. 7th Editions. London: The Machinery Publishing Co. Ltd.

Slocum, A. H. (1992). Precision Machine Design. New Jersey: Practice Hall Inc., Englewood Cliffs.

Weck, M. (1984). Handbook of Machine Tools Vol. 4, Metrological Analysis and Performace Test. Norwich: Wiley-Heyden.

Weck, M. (1996). ISO R230-1: Test Code for Machine Tools, Part 1 & 2 ISO. Switzerland

Weck, M. (1985). Millac 4H Operation Manual. Okuma & Howa Machinery Ltd, Nagoya, Japan

Downloads

Published

2021-12-20

Issue

Vol. 13 No. 2 (2003): December 2003

Section

Natural Science and Technology

License

Authors who publish with this journal agree to the following terms:

(1) Copyright of the published articles will be transferred to the journal as the publisher of the manuscripts. Therefore, the author confirms that the copyright has been managed by the journal.

(2) Publisher of Jurnal Penelitian is University of Merdeka Malang.

(3) The copyright follows Creative Commons Attribution–ShareAlike License (CC BY SA): This license allows to Share — copy and redistribute the material in any medium or format, Adapt — remix, transform, and build upon the material, for any purpose, even commercially.