Pengaruh variasi sumber kalor terhadap besarnya laju perpindahan kalor melalui dinding komposit

Authors

  • Rudi Hariyanto Department of Mechanical Engineering, Faculty of Engineering, University of Merdeka Malang
  • Mohamad Ma'ruf Department of Mechanical Engineering, Faculty of Engineering, University of Merdeka Malang

DOI:

https://doi.org/10.26905/jp.v13i2.7027

Keywords:

Heat variation, Heat transfer rate, Composite

Abstract

Heat transfer is the study of how heat moves or flows from a place with a high temperature to a lower temperature so that heat can move due to a "temperature difference". There are three types of heat transfer, but for heat flow through composite materials, heat transfer analysis uses conduction heat transfer analysis. The rate of heat transfer through the composite material will vary depending on several parameters such as material properties, surface area, material thickness, and other parameters. Research to find out how big the influence of heat source variations on the rate of heat transfer through the composite wall resulted in the conclusion that the heat transfer rate also increased in proportion to the increase in the heat source. However, the use of composite walls in series causes the overall heat transfer rate to decrease because it is influenced by the thickness of the material. The thicker the material, the lower the heat transfer rate. 

Downloads

Download data is not yet available.

References

Bayazitoglu, Y. 1988. Element of Heat Transfer. McGraw-Hill Book

Company, Singapore Cussons Technology, 1988, Heat Transfer experiment, England

Wahyudi A. Harry, Analisa Besarnya Laju Perpindahan Panas Melalui Dinding Komposit, Tugas Akhir, 2002

Holman J. P. 1981, Heat Transfer, fifth edition, McGraw-Hill, Ltd. Singapore

Incroper F. P, 1996, Fundamentals of Heat and Mass Transfer, Fourth Edition, Printed in The United States of America

Pitts and Sissom, 1983. Theory and Problems of Heat Transfer, first edition, McGraw-Hill International Book Company, Singapore

Reynolds W C, 1994, Termodinamika Teknik, cetakan kelima, penerbit Erlangga, Jakarta.

Kreith Frank, 1997, Prinsip-prinsip Perpindahan Panas, edisi ketiga. penerbit Erlangga, Jakarta.

Downloads

Published

2021-12-20

How to Cite

Hariyanto, R., & Ma’ruf, M. (2021). Pengaruh variasi sumber kalor terhadap besarnya laju perpindahan kalor melalui dinding komposit. Jurnal Penelitian, 13(2), 436–455. https://doi.org/10.26905/jp.v13i2.7027

Issue

Vol. 13 No. 2 (2003): December 2003

Section

Natural Science and Technology

License

Authors who publish in this journal agree to the following terms:

  1. Copyright of the published articles will be transferred to the journal as the publisher of the manuscripts. Therefore, the author confirms that the journal has managed the copyright.
  2. Publisher of Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang is University of Merdeka Malang.
  3. The copyright follows the Creative Commons Attribution-ShareAlike License (CC BY SA): This license allows to share, copy, and redistribute the material in any medium or format, adapt, remix, transform, and build upon the material, for any purpose, even commercially.