Relationship between Cutting Depth and Spindle Speed on Cutting Accuracy of Aluminum 6061 on the TU-3A Retrofit CNC Machine

Mohamad Eq Setya Wijaya, Imam Mashudi

Abstract


In the Mechanical Engineering Laboratory of the State Polytechnic of Malang, CNC machines experience decreased performance caused by abrasion and wear on mechanical components such as spindles, bearings, and rails, as well as electronic damage, outdated hardware and software, and inadequate maintenance. This study aims to evaluate the effect of cutting parameters on the roundness of machining results. The results of data analysis show that the depth of cut has a significant effect on roundness, with an F value of 8.05 and a P value of 0.030, which means significant at the 0.05 level. In contrast, spindle speed does not have a significant impact on roundness, with a P value far above 0.05. In addition, the interaction between depth of cut and spindle speed does not show a significant effect on roundness, with an F value of 2.08 and a P value of 0.206.


Keywords


CNC TU-3A, Depth of cut, Spindle Speed, Roundness

Full Text:

PDF

References


A. Nugraha, F. R. T. Saputro, and A. Kurniawan, ‘Optimasi Parameter Strategi Pemotongan 2D Contour CNC Milling terhadap Kekasaran Permukaan dan Kebulatan Dengan Metode Taguchi dan Anova’, AL JAZARI J. Ilm. Tek. MESIN, vol. 8, no. 1, Art. no. 1, Apr. 2023, doi: 10.31602/al-jazari.v8i1.10470.

A. Mufarrih, A. Harijono, U. S. Amrullah, N. Qosim, and Z. F. Emzain, ‘Analisa Kebulatan pada Proses Drilling Material KFRP’, J. Mesin Nusant., vol. 5, no. 2, pp. 201–212, 2022, doi: 10.29407/jmn.v5i2.19472.

D. Bartholomeus and J. Pardadi, Analisa Hubungan Kecepatan Pemakanan dan Putaran Spindel Terhadap Daya yang Digunakan Serta Kekasaran Permukaan pada Mesin CNC TU-3A. Universitas Gadjah Mada, 2017.

M. P. Groover, Fundamentals of Modern Manufacturing: Materials, Processes, and Systems, 7th edition. Wiley, 2020.

Rahdiyanta, ‘Kegiatan Belajar I : Mendiskripsikan mesin bubut CNC’, Univ. Negeri Yogyak., pp. 1–8.

D. Rahdiyanta, Buku 3 Proses Frais (Milling). Jurnal Pendidikan Teknik Mesin, 2010.

E. Safitri, M. Rameli, and R. A.K., ‘Implementasi Kontroler P-PI Kaskade untuk Meningkatkan Keakuratan Mesin Bubut CNC’, J. Tek. ITS, vol. 1, Sep. 2012.

B. Gaurav, ‘Modify and Convert Conventional Lathe Machine to Special Purpose Lathe Machine Operated using CNC Unit’, Int. J. Res. Appl. Sci. Eng. Technol., vol. 11, pp. 6696–6702, May 2023, doi: 10.22214/ijraset.2023.53227.

A. Andoko et al., ‘Simulation of CNC milling 5 axis with finite element method’, presented at the AIP Conference Proceedings, 2020, pp. 040013–040013. doi: 10.1063/5.0015746.

V. Selvaraj and S. Min, ‘Real-Time Fault Identification System for a Retrofitted Ultra-Precision CNC Machine from Equipment’s Power Consumption Data: A Case Study of an Implementation’, Int. J. Precis. Eng. Manuf.-Green Technol., Jan. 2023, doi: 10.1007/s40684-022-00497-x.

F. Sönmez, ‘The Effect of Feed and Depth of Cut Parameters on Surface Roughness and Chip Morphology in Stainless Steel Materials’, Eur. J. Tech., Jun. 2024, doi: 10.36222/ejt.1456172.

S. Alrabii and M. S., ‘Surface Roughness and Roundness Error Prediction Models in Turning Low Carbon Steel’, Kufa J. Eng., vol. 3, pp. 47–68, May 2014, doi: 10.30572/2018/KJE/321263.

R. Soenoko, A. Suprapto, and M. A. Choiron, ‘Surface roughness and roundness optimization on turning process of aluminium alloy with Taguchi method’, J. Mech. Eng., vol. 14, no. 1, pp. 87–96, 2017.

S. Sudjatmiko, S. Rudy, S. Agus, and A. C. Moch, ‘Correlation of surface roughness, tool wear, and chip slenderness ratio in the lathe process of aluminum alloy–6061’, Восточно-Европейский Журнал Передовых Технологий, no. 4 (1), pp. 54–60, 2019.

J. Jurko, K. Paľová, P. Michalík, and M. Kondrát, ‘Optimization of Sustainable Production Processes in C45 Steel Machining Using a Confocal Chromatic Sensor’, Lubricants, vol. 12, p. 99, Mar. 2024, doi: 10.3390/lubricants12030099.

S. Kumar and P. N. Rao, ‘Multi-Response Optimization of process Parameter in Vertical Milling Machine of EN 31 Using Taguchi Method’, J. Univ. Shanghai Sci. Technol., vol. 23, pp. 228–235, Nov. 2021, doi: 10.51201/JUSST/21/11890.




DOI: https://doi.org/10.26905/jtmt.v20i2.13724

Refbacks

  • There are currently no refbacks.


TRANSMISI

Universitas Merdeka Malang

Mailing Address:

Jalan Terusan Dieng 62-64 Malang, 65146, East Java, Indonesia
Phone: 081333961913 Fax: (0341) 560836
Email: [email protected]