Manufacturing Process of Thinner Storage Tank with a Capacity of 226 Liters

Authors

  • Akmal Lukmanulhakim Universitas Singaperbangsa Karawang
  • Deri Teguh Santoso Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.26905/jtmt.v21i1.13930

Keywords:

Tank, Welding, Stainless Steel, Thinner

Abstract

This research focuses on the manufacturing process of a thinner storage tank with a capacity of 226 liters. The objective is to identify the materials and process stages involved in producing the tank. The study employs a direct research and development methodology to explore this topic. For the tank’s body, SUS 403 stainless steel is selected for its excellent corrosion resistance, while ST45 steel is chosen for the frame due to its high load-bearing capacity. The manufacturing process includes material selection, cutting, rolling, welding, finishing, and quality control. In the welding phase, Gas Tungsten Arc Welding (GTAW) is utilized with ER308L filler, applying a current of 70 amperes for the tank body and 100 amperes for the tank head. For the frame, Shielded Metal Arc Welding (SMAW) is employed using RD260 2.6mm electrodes at a current of 90 amperes. The study aims to provide comprehensive insights into the selection and application of materials and processes for efficient tank.

Downloads

Download data is not yet available.

References

[1] A. A. Kharisma, A. F. Givari, and I. S. Mulyana, “Desain Dan Analisis Kekuatan Tangki Fire Water Storage Tank Tipe Fix Cone Roof Kapasitas 1500 Kl Dengan Perhitungan Aktual Dan Simulasi Software,” J. Ilm. Teknol. dan Rekayasa, vol. 26, no. 1, pp. 69–78, 2021, doi: 10.35760/tr.2021.v26i1.3692.

[2] A. Fahruzi, “Rancang Bangun Sensor Level Berbasis Sensor Tekanan Pada Tangki Proses Minyak Kelapa,” J. IPTEK, vol. 21, no. 1, p. 69, 2017, doi: 10.31284/j.iptek.2017.v21i1.107.

[3] A. F. Fran Nur Felani, Kosjoko, “Uji Perbandingan Kekuatan Tarik Pengelasan Stainless Steel AISI 304 Menggunakan Las Tig (Tungsten Inert Gas) Dan Las Mig (Metal Inert Gas) Dengan Variasi Media Pendingin,” J-Proteksion, vol. 1, no. 2, pp. 13–16, 2017.

[4] R. Afriany, Asmadi, R. Djunaidi, and C. Prasetya, “Analisa Hasil Pengelasan GTAW Stainless Steel 304,” J. Tek., vol. 6, no. 2, pp. 146–154, 2019.

[5] M. Lasno, H. Purwanto, and M. Dzulfikar, “Pengaruh Variasi Arus Pengelasan Tig (Tungsten Inert Gas) Terhadap Sifat Fisik Dan Mekanik Pada Stainless Steel Hollow 304,” J. Ilm. Momentum, vol. 15, no. 2, 2019, doi: 10.36499/jim.v15i2.3079.

[6] A. G. Pompana, S. Tangkuman, and T. Arungpadang, “Rancang Bangun Tangki Pemanas Pada Distilator Nira Aren Penghasil Alkohol,” J. Tekno Mesin, vol. 9, no. 2008, pp. 12–20, 2023, [Online]. Available: https://ejournal.unsrat.ac.id/v3/index.php/jtmu

[7] D. Raditya Dionisius Himando, “Pengaruh Arus Pengelasan Tig Terhadap Kekuatan Tarik Sambungan Material Stainless Steel Aisi 316 Dionisius,” J. Econ. Perspect., vol. 2, no. 1, pp. 1–4, 2022, [Online]. Available: http://www.ifpri.org/themes/gssp/gssp.htm%0Ahttp://files/171/Cardon - 2008 - Coaching d’équipe.pdf%0Ahttp://journal.um-surabaya.ac.id/index.php/JKM/article/view/2203%0Ahttp://mpoc.org.my/malaysian-palm-oil-industry/%0Ahttps://doi.org/10.1080/23322039.2017

[8] B. I. G. Sembiring, U. Budiarto, and ..., “Analisis Pengaruh Variasi Kuat Arus Listrik dan Posisi Pengelasan Shielded Metal Arc Welding (SMAW) Terhadap Kekuatan Material Baja Karbon Sedang,” J. Tek. Perkapalan, vol. XX, no. X, pp. 1–10, 2024, [Online]. Available: https://ejournal3.undip.ac.id/index.php/naval/article/view/43970%0Ahttps://ejournal3.undip.ac.id/index.php/naval/article/download/43970/31257

[9] A. B. Winarno, B. Prasojo, and M. M. E. Prayitno, “Desain dan Pemodelan Pada Storage Tank Kapasitas 50.000 kL (Studi Kasus PT.Pertamina Region V TBBM Tuban),” J. Tek., pp. 1–4, 2017.

[10] A. Widyatmoko, M. Amin, and Solechan, “Pengaruh Arus Pengelasan Las TIG Terhadap Karakteristik Sifat Mekanis Stainless Steel Type 304,” Traksi, vol. 17, no. 1, pp. 38–52, 2017.

Downloads

Published

2025-03-11