Analisa Pengaruh Kekakuan Secondary Spring Terhadap Performa Sepeda Motor Scoopy

Authors

  • Muchammad Lutfi Hidayatulloh et al.

DOI:

https://doi.org/10.26905/jtmt.v21i2.16377

Keywords:

dynotest, CVT spring, performance

Abstract

Continuously Variable Transmission (CVT) transmission system on automatic motorcycles has an important role in efficiently distributing engine power to the wheels. One of the main components in the CVT system is the secondary spring, which plays a role in regulating the back pressure of the secondary pulley to maintain belt tension in the power transfer process, the level of secondary spring stiffness can affect the characteristics of power transfer. This study aims to analyze the effect of the stiffness of the Dytona brand secondary spring with three variations of stiffness (1000 RPM, 1500 RPM, 2000 RPM) on the performance of the Honda Scoopy motorcycle. The method used is an experiment with a quantitative approach, where each variation of the secondary spring is tested using a BRT 50 LA dyno test machine to obtain data such as power, torque, acceleration and top speed. The test results show that the secondary spring with lower stiffness provides a faster initial response and is able to maintain the transmission ratio longer at high speeds. Meanwhile, the secondary spring with higher stiffness provides a greater power boost, but reduces top speed because the transmission ratio decreases faster. It can be concluded that the selection of secondary spring stiffness must be adjusted to the desired performance characteristics, whether to achieve maximum power or optimize acceleration efficiency and high speed. This finding can be used as a reference in modifying the CVT system to improve motorcycle performance, especially the Honda Scoopy

Downloads

Download data is not yet available.

References

References

[1] A. N. Akhmadi, M. K. Usman, and M. T. Qurohman, "Pengaruh Perbandingan Secondary Sheave Spring Standard Dan Racing Terhadap Akselerasi," J. Rekayasa Mater. Manufaktur Dan Energi, vol. 4, no. 2, Sep. 2021, doi: 10.30596/rmme.v4i2.8074.

[2] A. Junaidi, R. Rifdarmon, W. Purwanto, and H. Maksum, "Analisis Penggunaan Variasi Driven Face Spring Terhadap Torsi, Daya Dan Top Speed Pada Sepeda Motor Honda Vario All New 125 cc," JTPVI J. Teknol. Dan Pendidik. Vokasi Indones., vol. 1, no. 1, Feb. 2023, doi: 10.24036/jtpvi.v1i1.15.

[3] A. Rosid, J. Suwignyo, and F. Z. Bahtiar, "studi eksperimen pengaruh pegas driven face dan weight set clutch cvt terhadap performa dan konsumsi bahan bakar spesifik pada sepeda motor matic honda vario 125 cc," in Prosiding Seminar Nasional & Internasional EDUSTEM, 2023, pp. 9–17. [Online]. Available: https://www.e-journal.ivet.ac.id/index.php/EDUSTEM/article/view/2780. [Accessed: Jun. 29, 2025].

[4] M. D. B. P, I. K. A. Atmika, and I. A. Subagia, "Variasi berat roller sentrifugal Pada continuosly variable transmission (CTV) terhadap kinerja traksi sepeda motor," J. Energi Dan Manufaktur, Nov. 2012. [Online]. Available: https://ojs.unud.ac.id/index.php/jem/article/view/2270. [Accessed: Jun. 29, 2025].

[5] Sularso and K. Suga, Dasar Perencanaan dan Pemilihan Elemen Mesin. Jakarta: Pradnya Paramita, 1991.

[6] F. T. W. Nugraha and A. S. Fauzi, "Analisa Kebutuhan Daya Pada Alat Pemeras Kelapa Kapasitas 20 Kg/Jam," 2022.

[7] A. Ulzan et al., "Analisis Variasi Roller Dan Spring CVT Terhadap Torsi, Daya, Akselarasi Dan Top Speed Sepeda Motor Matic," JTPVI J. Teknol. Dan Pendidik. Vokasi Indones., vol. 3, no. 1, Jan. 2025, doi: 10.24036/jtpvi.v3i1.275.

[8] K. N. N. C. Permana and W. D. Rahardjo, "Pengaruh Penggunaan Variasi Berat Roller Dan Pegas Pully Sekunder Pada Cvt (Countinuously Variable Transmission) Terhadap Daya, Torsi, Dan Konsumsi Bahan Bakar Honda Beat Pgm-Fi Tahun 2013," Automot. Sci. Educ. J., vol. 9, no. 2, pp. 30–35, 2020.

[9] M. Shobirin and H. Kusbandono, "analisis perbandingan penggunaan pegas cvt racing 1000 rpm 1500rpm 2000 rpm terhadap performa sepeda motor honda beat 110 cc," J. Inov. Dan Kolaborasi Nusant., vol. 6, no. 2, Jun. 2025. [Online]. Available: https://ejurnals.com/ojs/index.php/jikn/article/view/2423. [Accessed: Jun. 29, 2025].

[10] R. Fatahilah, P. Purwoko, R. Monasari, and M. E. Martawati, "Pengaruh Variasi Pegas CVT dan Massa Roller terhadap Performa Motor 110 cc," J. Kendali Tek. Dan Sains, vol. 3, no. 2, pp. 59–71, Jun. 2025, doi: 10.59581/jkts-widyakarya.v3i2.5170.

[11] A. F. Akbar, H. Maksum, and D. Fernandez, "Pengaruh Penggunaan Variasi Berat Roller Cvt Terhadap Kecepatan Pada Sepeda Motor Yamaha Mio Sporty," Automot. Eng. Educ. J., vol. 4, no. 2, 2015.

[12] "Katalog Suku Cadang Honda Scoopy eSP K2F," Harga Kredit Motor Honda | Dealer Resmi Sepeda Motor Honda. [Online]. Available: https://www.hondacengkareng.com/catalogs/katalog-suku-cadang-honda-scoopy-esp-k2f/. [Accessed: Jun. 29, 2025].

[13] "Komponen Pulley Primer: Bagian dan Fungsinya - Gerai Teknologi." [Online]. Available: https://www.geraiteknologi.com/2023/12/bagian-komponen-pulley-primer.html. [Accessed: Jun. 29, 2025].

[14] "New Scoopy Prestige / Stylish - PT. HAYATI PRATAMA MANDIRI." [Online]. Available: https://honda-hayati.com/product/new-scoopy-prestige-stylish/. [Accessed: Jun. 29, 2025].

[15] "SWOSC-V Steel Wire | EN VDSiCr / EN 10270-2," Suzuki Garphyttan. [Online]. Available: https://www.suzuki-garphyttan.com/wire-products/swosc-v/. [Accessed: Jun. 29, 2025].

Downloads

Published

2025-09-01

Issue

Vol. 21 No. 2 (2025): September (2025)

Section

Article

License

Creative Commons License
This work, is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges and earlier and greater citation of published work.