Increase the economic potential of the Ambulu Community by providing appropriate batik drying technology

Boy Arief Fachri; Istiqomah Rahmawati; Bekti Palupi; Meta Fitri Rizkiana; Brainy Aprillia Putri; Muhamad Arya Pringgodani; Indira Puspitasari; Lintang Nurdea Ahyurint; Nanda Melani Ardianti

doi:10.26905/abdimas.v9i3.13256

Increase the economic potential of the Ambulu Community by providing appropriate batik drying technology

Boy Arief Fachri, Istiqomah Rahmawati, Bekti Palupi, Meta Fitri Rizkiana, Brainy Aprillia Putri, Muhamad Arya Pringgodani, Indira Puspitasari, Lintang Nurdea Ahyurint, Nanda Melani Ardianti

Abstract

One of the MSMEs developed Batik as a regional product is Rezti's Batik. Rezti's Batik is located in Ambulu, Jember Regency, about 28.4 km from the University of Jember. Increasing the number of consumer orders has made Rezti's Batik production continue to increase. One of the obstacles faced by Rezti's Batik is the process of making Batik which takes a long time because the drying process still relies on heat from the sun, which takes 4-6 hours. The process can also take longer if the rainy season slows the production process's completion. The solution method is the manufacture of appropriate technology in the form of installing a batik cloth dryer. The batik cloth drying installation implementation at Rezti's Batik is a drying system that utilizes heat from the furnace in the sagging process as a heating medium. The designed dryer consists of a stove as a heat generator which will later be distributed with air from the blower so that the hot air will spread evenly throughout the room.

Keywords

Automatic, Batik, Dryer, Production, Weather

Full Text:

PDF

References

Andarwati, M., Subiyantoro, E., & Subadyo, T. (2018). Pengaruh pelatihan dan penerapan Teknologi Tepat Guna (TTG) terhadap keberdayaan pengrajin batik tulis ramah lingkungan. Briliant: Jurnal Riset dan Konseptual, 3(3), 280-286. https://doi.org/10.28926/briliant.v3i3.189

Andrijono, D., & Sufiyanto, S. (2018). Bimbingan teknis desain dapur pemanas model tertutup dan cerobong ganda pada manajemen bisnis UKM pandai besi Wilayah Disperindag Kabupaten Malang. Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang, 3(1), 32-40. https://doi.org/10.26905/abdimas.v3i1.2248

Cahyanto, W. T., Haryadi, A., & Hartono, H. (2018). Prospek pengembangan kewirausahaan sosial melalui diversifikasi produk sepeda keseimbangan dan perluasan pemasaran di Banyumas. Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang, 3(2), 57-63. https://doi.org/10.26905/abdimas.v3i2.2386

Debele, G. M., & Qian, X. (2020). Automatic room temperature control system using Arduino UNO R3 and DHT11 sensor. In 2020 17th International Computer Conference on Wavelet Active Media Technology and Information Processing, ICCWAMTIP 2020, 428–432. https://doi.org/10.1109/ICCWAMTIP51612.2020.9317307

Dwipasari, L., & Subianto, T. (2017). Pendampingan pengembangan KUB (Kelompok Usaha Bersama) Batik Malangan di Kota Malang. Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang, 2(2), 42-50. https://doi.org/10.26905/abdimas.v2i2.1816

Hernawati, D., & Amin, M. (2017). Analisis self efficacy mahasiswa melalui kemampuan presentasi di kelas. Education and Human Development Journal, 2(1), 26–33. https://doi.org/10.33086/ehdj.v2i1.379

Ismawati, I., Kastiawan, I. M., Ainun, M. B., Fajaryaningtyas, D. A., Murnawan, H., & Sihmawati, R. R. (2024). Teknologi tepat guna pengolahan buah mangrove untuk meningkatkan pendapatan masyarakat pesisir. JMM (Jurnal Masyarakat Mandiri), 8(1), 653-661. https://doi.org/10.31764/jmm.v8i1.20184

Kamelia, L., Sukmawiguna, Y., & Adiningsih, N. U. (2017). Rancang bangun sistem exhaust fan otomatis menggunakan sensor Light Dependent Resistor (LDR). Jurnal Istek, 10(1), 154-169.

Muhsinin, S., Dinata, D. I., Andriansyah, I., & Asnawi, A. (2019). Peningkatan potensi ibu rumah tangga dalam mengolah sampah organik rumah tangga menggunakan Metode Takakura di Desa Cibiru Wetan, Kabupaten Bandung. Jurnal Pengabdian Pada Masyarakat, 4(2), 179-186. https://doi.org/10.30653/002.201942.110

Ramadhan, A., Lelo, L., & Rasyid, R. (2020). Pelatihan pemanfaatan sampah plastik sebagai material produk hiasan bagi lulusan SMA di Kota Tangerang. Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang, 5(1), 1-17. https://doi.org/10.26905/abdimas.v5i1.3083

Raya, A. B., Andiani, R., Siregar, A. P., Prasada, I. Y., Indana, F., Simbolon, T. G. Y., Kinasih, A. T., & Nugroho, A. D. (2021). Challenges, open innovation, and engagement theory at craft smes: Evidence from Indonesian batik. Journal of Open Innovation: Technology, Market, and Complexity, 7(2), 121. https://doi.org/10.3390/joitmc7020121

Rosmawar, N. H., Purba, M., & Nurmasyitah, N. (2022). Kajian konsep termodinamika pada hair dryer sederhana. Fisitek: Jurnal Ilmu Fisika dan Teknologi, 6(2), 16–25. http://dx.doi.org/10.30821/fisitekfisitek.v6i2.14329

Syaharuddin, S., & Ibrahim, M. (2017). Aplikasi sistem informasi desa sebagai teknologi tepat guna untuk pendataan penduduk dan potensi desa. JMM (Jurnal Masyarakat Mandiri), 1(1), 60-67. https://doi.org/10.31764/jmm.v1i1.14

Wardana, C., Kuncoroadi, R. T., Pramudya, A. G., & Rahayu, S. Penerapan alat pengering batik dengan memanfaatkan kalor tungku pelorotan guna meningkatkan efesiensi produksi sebagai antisipasi cuaca yang tidak menentu. https://doi.org/10.13140/RG.2.2.15530.02244

Zainuddin, D., Wiratmani, E., & Usman, R. (2019). Pengabdian kepada masyarakat anggota pemberdayaan kesejahteraan keluarga di Kelurahan Cinere dan Kelurahan Gandul Depok Jawa Barat. Abdimas Universal, 1(2), 1-4. https://doi.org/10.36277/abdimasuniversal.v1i2.28

DOI: https://doi.org/10.26905/abdimas.v9i3.13256