Increase the economic potential of the Ambulu Community by providing appropriate batik drying technology
Abstract
One of the MSMEs developed Batik as a regional product is Rezti's Batik. Rezti's Batik is located in Ambulu, Jember Regency, about 28.4 km from the University of Jember. Increasing the number of consumer orders has made Rezti's Batik production continue to increase. One of the obstacles faced by Rezti's Batik is the process of making Batik which takes a long time because the drying process still relies on heat from the sun, which takes 4-6 hours. The process can also take longer if the rainy season slows the production process's completion. The solution method is the manufacture of appropriate technology in the form of installing a batik cloth dryer. The batik cloth drying installation implementation at Rezti's Batik is a drying system that utilizes heat from the furnace in the sagging process as a heating medium. The designed dryer consists of a stove as a heat generator which will later be distributed with air from the blower so that the hot air will spread evenly throughout the room.
Keywords
Full Text:
PDFReferences
Andarwati, M., Subiyantoro, E., & Subadyo, T. (2018). Pengaruh pelatihan dan penerapan Teknologi Tepat Guna (TTG) terhadap keberdayaan pengrajin batik tulis ramah lingkungan. Briliant: Jurnal Riset dan Konseptual, 3(3), 280-286. https://doi.org/10.28926/briliant.v3i3.189
Andrijono, D., & Sufiyanto, S. (2018). Bimbingan teknis desain dapur pemanas model tertutup dan cerobong ganda pada manajemen bisnis UKM pandai besi Wilayah Disperindag Kabupaten Malang. Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang, 3(1), 32-40. https://doi.org/10.26905/abdimas.v3i1.2248
Cahyanto, W. T., Haryadi, A., & Hartono, H. (2018). Prospek pengembangan kewirausahaan sosial melalui diversifikasi produk sepeda keseimbangan dan perluasan pemasaran di Banyumas. Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang, 3(2), 57-63. https://doi.org/10.26905/abdimas.v3i2.2386
Debele, G. M., & Qian, X. (2020). Automatic room temperature control system using Arduino UNO R3 and DHT11 sensor. In 2020 17th International Computer Conference on Wavelet Active Media Technology and Information Processing, ICCWAMTIP 2020, 428–432. https://doi.org/10.1109/ICCWAMTIP51612.2020.9317307
Dwipasari, L., & Subianto, T. (2017). Pendampingan pengembangan KUB (Kelompok Usaha Bersama) Batik Malangan di Kota Malang. Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang, 2(2), 42-50. https://doi.org/10.26905/abdimas.v2i2.1816
Hernawati, D., & Amin, M. (2017). Analisis self efficacy mahasiswa melalui kemampuan presentasi di kelas. Education and Human Development Journal, 2(1), 26–33. https://doi.org/10.33086/ehdj.v2i1.379
Ismawati, I., Kastiawan, I. M., Ainun, M. B., Fajaryaningtyas, D. A., Murnawan, H., & Sihmawati, R. R. (2024). Teknologi tepat guna pengolahan buah mangrove untuk meningkatkan pendapatan masyarakat pesisir. JMM (Jurnal Masyarakat Mandiri), 8(1), 653-661. https://doi.org/10.31764/jmm.v8i1.20184
Kamelia, L., Sukmawiguna, Y., & Adiningsih, N. U. (2017). Rancang bangun sistem exhaust fan otomatis menggunakan sensor Light Dependent Resistor (LDR). Jurnal Istek, 10(1), 154-169.
Muhsinin, S., Dinata, D. I., Andriansyah, I., & Asnawi, A. (2019). Peningkatan potensi ibu rumah tangga dalam mengolah sampah organik rumah tangga menggunakan Metode Takakura di Desa Cibiru Wetan, Kabupaten Bandung. Jurnal Pengabdian Pada Masyarakat, 4(2), 179-186. https://doi.org/10.30653/002.201942.110
Ramadhan, A., Lelo, L., & Rasyid, R. (2020). Pelatihan pemanfaatan sampah plastik sebagai material produk hiasan bagi lulusan SMA di Kota Tangerang. Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang, 5(1), 1-17. https://doi.org/10.26905/abdimas.v5i1.3083
Raya, A. B., Andiani, R., Siregar, A. P., Prasada, I. Y., Indana, F., Simbolon, T. G. Y., Kinasih, A. T., & Nugroho, A. D. (2021). Challenges, open innovation, and engagement theory at craft smes: Evidence from Indonesian batik. Journal of Open Innovation: Technology, Market, and Complexity, 7(2), 121. https://doi.org/10.3390/joitmc7020121
Rosmawar, N. H., Purba, M., & Nurmasyitah, N. (2022). Kajian konsep termodinamika pada hair dryer sederhana. Fisitek: Jurnal Ilmu Fisika dan Teknologi, 6(2), 16–25. http://dx.doi.org/10.30821/fisitekfisitek.v6i2.14329
Syaharuddin, S., & Ibrahim, M. (2017). Aplikasi sistem informasi desa sebagai teknologi tepat guna untuk pendataan penduduk dan potensi desa. JMM (Jurnal Masyarakat Mandiri), 1(1), 60-67. https://doi.org/10.31764/jmm.v1i1.14
Wardana, C., Kuncoroadi, R. T., Pramudya, A. G., & Rahayu, S. Penerapan alat pengering batik dengan memanfaatkan kalor tungku pelorotan guna meningkatkan efesiensi produksi sebagai antisipasi cuaca yang tidak menentu. https://doi.org/10.13140/RG.2.2.15530.02244
Zainuddin, D., Wiratmani, E., & Usman, R. (2019). Pengabdian kepada masyarakat anggota pemberdayaan kesejahteraan keluarga di Kelurahan Cinere dan Kelurahan Gandul Depok Jawa Barat. Abdimas Universal, 1(2), 1-4. https://doi.org/10.36277/abdimasuniversal.v1i2.28
DOI: https://doi.org/10.26905/abdimas.v9i3.13256
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Indexing by
Index Copernicus International (ICI)
Tools:
Supported By:
Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang Mailing Address: Address: Jl. Terusan Raya Dieng No. 62-64, Malang, Indonesia, 65146 Phone/Fax: +62341-5080008 Email: [email protected]
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. |