Pelatihan Pemanfaatan Sampah Plastik sebagai Material Produk Hiasan bagi Lulusan SMA di Kota Tangerang

Ali Ramadhan, Lelo Lelo, Ridwan Rasyid

Abstract


Nowadays, waste is one of the environmental problems, because plastic waste is known to have a long life to decompose in the soil. Ornamental products are one of the products that have good value and can be placed freely. This activity aims to develop knowledge in terms of making decorative products using plastic waste. Participants are high school graduates in Tangerang. By using training methods, ornamental products can be developed using basic plastic waste materials that have gone through the pre-processing stage. The training stage includes presentation, material selection, design, material processing, review, and display. The implementation of this activity, it was found that the use of plastic waste which is used as a base material for ornamental products can provide additional knowledge to high school graduates as well as increase the ability to practice in making design works. Participants had the opportunity to have income from the sale of the product design of the waste processing.

 

How to cite:

Ramadhan, A., Lelo, L., & Rasyid, R. (2020). Pelatihan Pemanfaatan Sampah Plastik sebagai Material Produk Hiasan bagi Lulusan SMA di Kota Tangerang. Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang, 5(1), 1-17.

DOI: https://doi.org/10.26905/abdimas.v5i1.3083


Keywords


Decoration; Plastic; Products; Utilization; Waste

Full Text:

PDF

References


Abarna, R., Sakthi, R., Sakthivel, B., Sandeeshkumar, K., & Saranraj, S. (2019). Design and analysis of mini injection molding machine for recycling of plastic wastes. South Asian Journal of Engineering and Technology, 8(2), 312-323.

Adam, S. (1992). Dasar-dasar Mikrobiologi Parasitisme untuk Perawat. Jakarta: Penerbit Buku Kedokteran EGC.

Agustin, D. (2018). Desain booth display ramah lingkungan untuk pemasaran produk olahan hasil tambak. Jurnal Envirotek, 10(1). https://doi.org/10.33005/envirotek.v10i1.1168

Ahvenainen, R. (2003). Modern Plastics Handbook. 1st Edition. United Kingdom: Woodhead Publishing Limited.

Amalia, A. R., & Uswatun, D. A. (2019). Analisis respon mahasiswa dalam penerapan group work rules pada metode presentasi di program studi pendidikan guru sekolah dasar. Jurnal Holistika, 3(2), 81-88.

Anita, R. R., & Puspitasari, C. (2019). Penerapan olahan limbah kantong plastik dengan Teknik Crochet sebagai unsur dekoratif pada produk fesyen. Jurnal Atrat, 7(1), 81-91

Arico, Z., & Jayanthi, S. (2017). Pengolahan limbah plastik menjadi produk kreatif sebagai peningkatan ekonomi masyarakat pesisir. Martabe: Jurnal Pengabdian Kepada Masyarakat, 1(1), 1-6. http://dx.doi.org/10.31604/jpm.v1i1.1-6

Bell, S. (2019). Elements of Visual Design in the Landscape. London: Routledge.

Charter, M., & Tischner, U. (2017). Sustainable Product Design. In Sustainable Solutions. London: Routledge.

Clark, R. C. (2019). Evidence-based Training Methods: A Guide for Training Professionals. Virginia: American Society for Training and Development.

Crawford, R. J., & Martin, P. J. (2020). Plastics Engineering. Oxford: Butterworth-Heinemann.

De Aguiar, J., de Oliveira, L., da Silva, J. O., Bond, D., Scalice, R. K., & Becker, D. (2017). A design tool to diagnose product recyclability during product design phase. Journal of Cleaner Production, 141, 219-229. https://doi.org/10.1016/j.jclepro.2016.09.074

Gargiulo, R. M., & Bouck, E. C. (2019). Special Education in Contemporary Society: An Introduction to Exceptionality. Sage Publications, Incorporated.

Hand, C. (2018). Working in Trash and Recycling Collection. New York: The Rosen Publishing Group, Inc.

Harper, K. H. (2017). Aesthetic Sustainability: Product Design and Sustainable Usage. London: Routledge.

Hasan, A. D. (2019). Study of Decorative Variety in Gorontalo Karawo Fabric in Aesthetic and Symbolic Elements. ARTic, 3, 121-134. https://doi.org/10.34010/artic.2019.3.2506.121-134

Hernawati, D., & Amin, M. (2017). Analisis self efficacy mahasiswa melalui kemampuan presentasi di kelas. Education and Human Development Journal, 2(1), 26-33 https://doi.org/10.33086/ehdj.v2i1.379

Lewis, H., Gertsakis, J., Grant, T., Morelli, N., & Sweatman, A. (2017). Design Environment: A Global Guide to Designing Greener Goods. London: Routledge.

Merrington, A. (2017). Recycling of plastics: In Applied Plastics Engineering Handbook. New Jersey: William Andrew Publishing.

Muhsinin, S., Dinata, D. I., Andriansyah, I., & Asnawi, A. (2019). Peningkatan Potensi Ibu Rumah Tangga dalam Mengolah Sampah Organik Rumah Tangga Menggunakan Metode Takakura di Desa Cibiru Wetan, Kabupaten Bandung. Jurnal Pengabdian pada Masyarakat, 4(2), 179-186. https://doi.org/10.30653/002.201942.110

Ormondroyd, G. A., & Morris, A. F. (Eds.). (2018). Designing with Natural Materials. Florida: CRC Press.

Paulinan, P., & Purwanto. (2001). Penulisan Bahan Ajar. Jakarta: Pusat Antar Universitas dan Pengembangan Aktivitas Instruksional: Direktorat Jenderal Pendidikan Tinggi, Depdiknas.

Pivnenko, K., Eriksen, M. K., Martín-Fernández, J. A., Eriksson, E., & Astrup, T. F. (2016). Recycling of plastic waste: the presence of phthalates in plastics from households and industry. Waste Management, 54, 44-52. https://doi.org/10.1016/j.wasman.2016.05.014

Putra, H. P., & Yuriandala, Y. (2010). Studi pemanfaatan sampah plastik menjadi produk dan jasa kreatif. Jurnal Sains & Teknologi Lingkungan, 2(1), 21-31. https://doi.org/10.20885/jstl.vol2.iss1.art3

Ragaert, K., Delva, L., & Van Geem, K. (2017). Mechanical and chemical recycling of solid plastik waste. Waste Management, 69, 24-58. https://doi.org/10.1016/j.wasman.2017.07.044

Rusman. (2011). Pembelajaran Berbasis Teknologi Informasi dan Komunikasi: Mengembangkan Profesionalisme Guru. Jakarta: Rajawali Pers.

Savitri, S., & Sriwardani, N. (2018). Produk tradisional sunda sebagai elemen dekoratif pada desain interior. Jurnal Atrat, 6(2), 109-115

Schwartz, M. (2016). Encyclopedia and Handbook of Materials, Parts, and Finishes. Florida: CRC press.

Selke, S. E., & Culter, J. D. (2016). Plastics Packaging: Properties, Processing, Applications, and Regulations. München: Carl Hanser Verlag GmbH Co KG.

Setiyawan, P. E. (2016). Penyuluhan tentang pengelolaan sampah dan pembuatan tempat sampah unik dari pipa PVC untuk masyarakat Desa Srigading Kecamatan Lawang. Abdimas: Jurnal Pengabdian kepada Masyarakat Universitas Merdeka Malang, 1(1), 30-35. https://doi.org/10.26905/abdimas.v1i1.1172

Sholihah, F. A., Normaladewi, A., & Laksono, P. T. (2019). Pengolahan plastik bekas menjadi bantal hias di Desa Ngempit Kecamatan Kraton Kabupaten Pasuruan. JIPEMAS: Jurnal Inovasi Hasil Pengabdian Masyarakat, 2(1), 9-17. https://doi.org/10.33474/jipemas.v2i1.1640

Singh, J., & Ordoñez, I. (2016). Resource recovery from post-consumer waste: important lessons for the upcoming circular economy. Journal of Cleaner Production, 134, 342-353. https://doi.org/10.1016/j.jclepro.2015.12.020

Singh, N., Hui, D., Singh, R., Ahuja, I. P. S., Feo, L., & Fraternali, F. (2017). Recycling of plastic solid waste: A state of the art review and future applications. Composites Part B: Engineering, 115.

Sukrorini, T., Budiastuti, S., Ramelan, H. A., & Kafiar, P. F. (2014). Kajian dampak timbunan sampah terhadap lingkungan di tempat pembuangan akhir (TPA) putri cempo Surakarta. J. EKOSAINS, 6(3).

Sulistiyorini, N. R., Darwis, R. S., & Gutama, A. S. (2015). Partisipasi masyarakat dalam pengelolaan sampah di lingkungan Margaluyu Kelurahan Cicurug. SHARE: Social Work Journal, 5(1).

Sunarjo, & Yuniarti, S. (2017). Pemanfaatan sayur buangan untuk pakan Cacing African Night Crawler (ANC) sebagai bahan pembuat pellet. Abdimas: Jurnal Pengabdian kepada Masyarakat Universitas Merdeka Malang, 2(1), 43-49. https://doi.org/10.26905/abdimas.v2i1.1290

Surdia, T & Saito, S. (2005). Pengetahuan Bahan Teknik. Jakarta: Pradnya Paramita

Swift, E. (2018). Style and function in Roman Decoration: Living with Objects and Interiors. London: Routledge.

Zainuddin, D., Wiratmani, E., & Usman, R. (2019). Pengabdian Kepada Masyarakat Anggota Pemberdayaan Kesejahteraan Keluarga di Kelurahan Cinere dan Kelurahan Gandul Depok Jawa Barat. Abdimas Universal, 1(2).1-4. https://doi.org/10.36277/abdimasuniversal.v1i2.28




DOI: https://doi.org/10.26905/abdimas.v5i1.3083

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Indexing by

width="150"

Garuda - Garba Rujukan Digital

SINTA - Science and Technology Index

Index of /public/site/images/septi

 Index Copernicus International (ICI)

Tools:

Turnitin

crossref

Mendeley

Supported By:

Universitas Merdeka Malang




Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang

Institute for Research and Community Services (LPPM)

Mailing Address:

Address: Jl. Terusan Raya Dieng No. 62-64, Malang, Indonesia, 65146
Phone/Fax: +62341-5080008
Email: abdimas@unmer.ac.id

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.