Teknologi Desain Alat Pencelupan Pewarnaan di UKM Batik Dewandaru di Kecamatan Wonosari Kabupaten Malang

Vika Annisa Qurrata; Ermita Yusida; Sudjatmiko Sudjatmiko; Lustina Fajar

doi:10.26905/abdimas.v5i3.4977

Teknologi Desain Alat Pencelupan Pewarnaan di UKM Batik Dewandaru di Kecamatan Wonosari Kabupaten Malang

Vika Annisa Qurrata, Ermita Yusida, Sudjatmiko Sudjatmiko, Lustina Fajar

Abstract

Batik Tulis Dewandaru UKM only does batik coloring. The method is done by dipping the batik into a tub and then shaking it by the operator, causing an awkward and less functional posture. Based on the above problems, the Community Service team provided a solution to implement dyeing and fixation technology. The first part is an oil drum made from Galvanized Steel Sheets JIS G3302 SGCC with a thickness of 1.8 mm, a sufficient 20 liters volume. It is equipped with a stainless steel pipe roller SS 304. The second part is a frame made of angled iron (L40x40x3), 50x50x1,25 hallow iron. , frame dimensions 1940 mm (W) x 660 mm (W) x 1600 mm (H). The third part of the fabric support pipe with a total of 4 (cross), is made of SS 304 stainless steel pipe material, 1870 mm long. The fourth part of the player, made of SS 304 stainless steel pipe material, 325 mm long, doubles as a media to rotate the cloth and drain it. The tool, which weighs 75 kg, makes the dyeing process shorter, which is 11 minutes. With the new tools, crafters can dye up to 35 fabrics to produce more fabric with perfect coloring.

DOI: https://doi.org/10.26905/abdimas.v5i3.4977

Keywords

Batik dye machine; Hollow iron; lever; SS304

Full Text:

PDF

References

Hartanto, B. W., & Subagyo, S. (2019). Kerangka kerja perencanaan pengembangan produk sebagai peningkatan daya saing industri kecil menengah. Jurnal Teknosains, 8(1), 26-38. https://doi.org/10.22146/teknosains.35574

Sonawan, H. (2010). Perancangan Elemen Mesin. Penerbit PT. Alfabeta. Bandung.

Ma'ruf, F., & Prasetya, A. (2015). Modifikasi alat pencelup batik secara mekanis pada proses pembuatan batik tulis guna meningkatkan kualitas warna. Teknika STTKD: Jurnal Teknik, Elektronik, Engine, 2(1), 41-49.

Nasfiendry. (2003). Diktat Perencanaan dan Perancangan Produk. PT. Gramedia Pustaka, Jakarta.

Nurfajriah, R. A. (2017, 08 November). Perancangan Alat Pencelupan Kain Batik yang Ergonomis di Sentra Batik Bogor Tradisiku. Seminar Nasional Teknik Industri Universitas Gadjah Mada, Yogyakarta.

Arifati, R. (2017). Re-design alat pencelupan kain batik untuk mengurangi resiko Musculoskeletal Disorders (MSDs) menggunakan metode ergonomi. Jurnal Citra Widya Edukasi, 9(3), 265-274.

Paryanto, P., Zamara, R., & Subekhi, S. M. A. (2017). Pembuatan alat pencelupan dan fiksasi zat warna alami mangrove jenis rhizopia stylosa, mahoni, dan indigofera. Prosiding SNST Fakultas Teknik, 1(1).

Pratama, F. R. D., Anugraha, R. A., & Syafrizal, T. (2015). Pengembangan detail desain meja pencelupan di workstation perwarnaan di rumah batik. E-Proceedings of Engineering, 2(2).

Primadhyta, S. (2015). Menteri Gobel bakal larang impor batik. CNN Indonesia. Diakses dari https://www.cnnindonesia.com/ekonomi/20150411153228-78-45910/menteri-gobel-bakal-larang-impor-batik

Susilaning, L., Hastuti, S., & Eddy, A. A. (2010). Rekayasa alat pencelup serat alam non tekstil (SANT).

Ulrich, K. T., & Eppinger, S. D. (2012). Product Design and Development. McGraw Hill International Edition. http://www.gudangrumus.com/2014/08/rumus-pesawat-sederhana.html (diakses, 15 Agustus 2020).

DOI: https://doi.org/10.26905/abdimas.v5i3.4977