Sosialisasi Perawatan dan Pembuatan Face Shield bagi Tenaga Kesehatan

Nuzulia Khoiriyah; Sri Mulyono; Bagus Satrio Waluyo Poetro

doi:10.26905/abdimas.v6i3.5288

Sosialisasi Perawatan dan Pembuatan Face Shield bagi Tenaga Kesehatan

Nuzulia Khoiriyah, Sri Mulyono, Bagus Satrio Waluyo Poetro

Abstract

Face shield is one of the important PPE (Personal Protective Equipment) for health workers in health services in the era of the COVID-19 pandemic as it is today. The limited number of face shield will certainly hamper the health services provided by the hospital. This Community Services activity was carried out at RSI Sultan Agung and RSIGM Sultan Agung to provide training on making face shield independently and also maintenance, so that face shield is more durable and not easily damaged. The tool used is a 3D printer which is easy to operate. 3D Printing technology will produce solid objects, and not like printing a sheet of paper on a printer that is commonly used. Design 3D models using CAD software. This activity was attended by 80 participants. 91.25% of participants are interested in making their own face shields as an effort to meet the need for face shields From the Community Services activities, around 100 face shields were produced which were handed over to the hospital.

Keywords

COVID-19, Face shield, Personal protective equipment, Printer 3D

Full Text:

PDF

References

Chu, D. K., Akl. E. A., Duda. S., Solo, K., Yaacoub, S., Schünemann, H. J., El-harakeh, A. (2020). Physical distancing, face masks, and eye protection to prevent person-to-person transmission of SARS-COV-2 and COVID-19: A systematic review and meta-analysis. The Lancet, 395(10242): 1973–87. https://doi.org/10.1016/s0140-6736(20)31142-9

Duarsa, A. B. S., Iing, I., Mardiah, A., Karmila, D., & Wanadiatri, H. (2020). Desain dan pembuatan 1000 face shield sebagai alat pelindung diri dalam mencegah COVID-19. Jurnal Pengabdian Masyarakat Sasambo, 2(1), 140-143.

Elias, C., Sekri, A., Leblanc, P., Cucherat, M., & Vanhems, P. (2020). Incubation period of COVID-19: A meta-analysis. https://doi.org/10.1016/j.ijid.2021.01.069

Hakim, R., Saputra, I., Utama, G. P., & Setyoadi, Y. (2019). Pengaruh temperatur nozzle dan base plate pada material PLA terhadap nilai masa jenis dan kekasaran permukaan produk pada mesin Leapfrog Creatr 3D Printer. Jurnal Teknologi dan Riset Terapan (JATRA), 1(1), 1-8.

Khurana, S., Singh, P., Sinha, T. P., Bhoi, S., & Mathur, P. (2020). Low-cost production of hand rubs and face shields in developing countries fighting the COVID19 pandemic. American Journal of Infection Control, 48(6), 726–727. https://doi.org/10.1016/j.ajic.2020.03.016

Mudayana, A. A. (2020, April 1). Kesiapan Rumah Sakit Tangani COVID-19. Suaramerdeka.com. Retrieved from: https://www.suaramerdeka.com/opini/pr-04129932/kesiapan-rumah-sakit-tangani-COVID19?page=all

Nugroho, C., Ismail, M., Sagoro, G., Maskarai, A., Gozali, M., Asrafi, A., Satoto, S., Saputra, R., Rusdwinanto, C., Sriyanto, S., Prasetyo, N., & Antartika, M. (2020). Desain dan pembuatan faceshield sebagai alat perlindungan diri penyebaran COVID19. Jurnal Pengabdian Kepada Masyarakat (AbdiMas), 2(1), 1-16. https://doi.org/10.30871/abdimas.v2i1.1995

Pesulima, T. L., & Hetharie, Y. (2020). Perlindungan hukum terhadap keselamatan kerja bagi tenaga kesehatan akibat pandemi COVID-19. SASI, 26(2), 280. https://doi.org/10.47268/sasi.v26i2.307

Pristiansyah, P., Hasdiansah, H., & Sugiyarto, S. (2019). Optimasi parameter proses 3D printing FDM terhadap akurasi dimensi menggunakan filament eflex. Manutech: Jurnal Teknologi Manufaktur, 11(01), 33-40. https://doi.org/10.33504/manutech.v11i01.98

Putra, K. S., & Sari, U. R. (2018). Pemanfaatan teknologi 3d printing dalam proses desain produk gaya hidup. In Seminar Nasional Sistem Informasi dan Teknologi Informasi, 917-922. STMIK Pontianak.

Roberge, R. J. (2016). Face shields for infection control: A review. Journal of Occupational and Environmental Hygiene, 13(4), 235–242. https://doi.org/10.1080/15459624.2015.1095302

Seprianto, D., Wilza, R., & Iskandar. (2017). Optimasi parameter pada proses pembuatan objek 3D printing dengan teknologi FDM terhadap akurasi geometri. Prosiding. In Seminar Nasional Teknik Industri Universitas Gadjah Mada. November: 37–49. Yogyakarta.

Sipahutar, T., & Eryando, T. (2020). COVID-19 case fatality rate and detection ability in Indonesia. Kesmas: National Public Health Journal, 15(2), 14–17. https://doi.org/10.21109/kesmas.v15i2.3936

Theopilus, Y., Yogasara, T., Theresia, C., & Octavia, J. R. (2020). Analisis risiko produk Alat Pelindung Diri (APD) pencegah penularan COVID-19 untuk pekerja informal di Indonesia. Jurnal Rekayasa Sistem Industri, 9(2), 115–34. https://doi.org/10.26593/jrsi.v9i2.4002.115-134

Wati, N. M. N., Lestari, N. K. Y., Jayanti, D. M. A. D., & Sudarma, N. (2020). Optimalisasi penggunaan Alat Perlindungan Diri (APD) pada masyarakat dalam rangka mencegah penularan virus COVID-19. Jurnal Empathy Pengabdian kepada Masyarakat, 1(1), 1–8. https://doi.org/10.37341/jurnalempathy.v1i1.1

DOI: https://doi.org/10.26905/abdimas.v6i3.5288