Analysis of the Effect of Trotel Variations and Valve Load Variations on the Performance of Gasoline and Diesel Fuel Motors

Cepi Yazirin, Artono Raharjo

Abstract


Technological developments in the modern era have experienced quite a significant increase, one of which is the combustion motorbike. Several things that are of concern to continue to be developed in combustion engines are the fuel system, ignition system and valve mechanism. The aim of this research is to analyze the effect of variations in throttle and valve load on petrol and diesel engines to determine the performance of these engines. The method used in this research is an experimental method by providing throttle variations and valve load variations on petrol and diesel motorbikes. The results of this research are that on petrol motorbikes the throttle changes with a fixed load at Pi, Pm, Ni, Ne, Nm, Qe, ηe, and ηi. There is a correlation between rotation and throttle, where the higher the rotation and the larger the throttle, the higher the value of the throttle. Pi, Pm, Ni, Ne, Nm, Qe, ηe, and ηi. In diesel motors Pi, Pm, Ni, Ne, Nm, Gs, Gg, Qb, Qeg, Qe, Qpp, ηe, and ηi There is a correlation between rotation and throttle, where the higher the rotation and the larger the throttle, the higher the value of Pi. , Pm, Ni, Ne, Nm, Gs, Gg, Qb, Qeg, Qe, Qpp, ηe, and ηi.

Keywords


Combustion Engine; Trotel; Valve; Performance

Full Text:

PDF

References


X. Zhen and Y. Wang, “An overview of methanol as an internal combustion engine fuel,” Renew. Sustain. Energy Rev., vol. 52, pp. 477–493, 2015, doi: 10.1016/j.rser.2015.07.083.

R. D. Reitz, “Directions in internal combustion engine research,” Combust. Flame, vol. 160, no. 1, pp. 1–8, 2013, doi: 10.1016/j.combustflame.2012.11.002.

J. H. Saragi and J. S. Purba, “Analisis Pengaruh Mekanisme Katub Terhadap Daya Pada Motor Bakar 4 Tak Dengan Bahan Bakar Bensin Mesin 1500 CC,” J. MESIL (Mesin Elektro Sipil), vol. 2, no. 2, pp. 16–27, 2021, doi: 10.53695/jm.v2i2.556.

F. Sulistiono, H. Kusbandoro, P. S. Mesin, F. Teknik, and U. S. Giri, “Pengaruh Variasi Bahan Bakar Terhadap Performa Sepeda Motor CB 150 R,” vol. 2, pp. 256–269, 2024.

R. D. Reitz et al., “IJER editorial: The future of the internal combustion engine,” Int. J. Engine Res., vol. 21, no. 1, pp. 3–10, 2020, doi: 10.1177/1468087419877990.

Y. Z. Zhang, E. H. Kung, and D. C. Haworth, “A PDF method for multidimensional modeling of HCCI engine combustion: Effects of turbulence/chemistry interactions on ignition timing and emissions,” Proc. Combust. Inst., vol. 30 II, no. 2, pp. 2763–2771, 2005, doi: 10.1016/j.proci.2004.08.236.

A. N. Parawangsa, “Rancang Bangun Media Pembelajaran Motor Bakar Torak Empat Langkah Berbahan Bakar Bensin,” Pros. Semin. Nas. NCIET, vol. 1, no. 1, pp. 487–499, 2020, doi: 10.32497/nciet.v1i1.165.

B. Y. Nugroho, Q. Fitriyah, and Y. Yunanto, “Pengaruh Penggunaan Bahan Bakar Pertamax Dan Pertalite Pada Motor Bakar Rasio Kompresi 9: 1 Terhadap Emisi Gas Buang,” Natl. Converence Ind. Eng. Technol., vol. 1, pp. 20–27, 2020.

G. T. Kalghatgi, “Developments in internal combustion engines and implications for combustion science and future transport fuels,” Proc. Combust. Inst., vol. 35, no. 1, pp. 101–115, 2015, doi: 10.1016/j.proci.2014.10.002.

G. T. Kalghatgi, “The outlook for fuels for internal combustion engines,” Int. J. Engine Res., vol. 15, no. 4, pp. 383–398, 2014, doi: 10.1177/1468087414526189.




DOI: https://doi.org/10.26905/jtmt.v20i1.12712

Refbacks

  • There are currently no refbacks.


TRANSMISI

Universitas Merdeka Malang

Mailing Address:

Jalan Terusan Dieng 62-64 Malang, 65146, East Java, Indonesia
Phone: 081333961913 Fax: (0341) 560836
Email: [email protected]