DESIGN CENTRIFUGAL PUMP ASSISTED BY CF TURBO 10.2 SOFTWARE

Siprianus Ndaha Ate

Abstract


In the industrial world the use of centrifugal pumps is often used to distribute water that is to support the smooth running of industrial processes or to cool a machine. Centrifugal pumps have a very broad scope of use with the head and the resulting capacity is very large and varied. In this final project, a centrifugal pump with a capacity of 30 m3 / hour, a pump head of 10 meters, a shaft rotation of 1500 rpm and a pressure difference of 10 bar in and out is planned. In the planning of centrifugal pumps, CF Turbo 10.2 software is used. Fluid is water ("Water") with a temperature of 200 C. Specific gravity of 1 kg / dm3. The output of the software includes blade diameter, shape, number of blades and geometric representation of blades. In planning this centrifugal pump as a comparison material, the specifications of the centrifugal pump are available. 5-level centrifugal pump is planned, each level has a head of 10 meters, a discharge of 30 m3/hour.

Keywords


Centrifugal Pump; Impeller; CF Turbo Software 10.2

Full Text:

PDF

References


Darto, I Made Sunada (2017), Analisis kinerja geometrik impeller pompa sentrifugal berbasis perangkat lunak, Transmisi, vol-xii edisi-2/ hal. 87-94.

Edi Widodo, ST, MT, 2016, Rekayasa Performansi Pompa Sentrifugal Untuk Menurunkan Head Loss, Laporan Akhir Penelitian Dosen Pemula, Universitas Muhammadiyah Sidoarjo.

Erwin Martianis1 Ikhwansyah Isranuri2 Indra3, 2012, Analisa Getaran Pada Pompa Sentrifugal Sistem Penyambungan Kopling Sabuk Untuk Monitoring Kondisi, Jurnal Dinamis,Volume II, No.10, Januari 2012, Teknik Mesin USU

Prihadi Nikosai TBS dan Irfan Syarief Arief, 2015, Optimasi Desain Impeller Pompa Sentrifugal Menggunakan Pendekatan CFD, Jurnal Sains Dan Seni ITS Vol. 4, No.2, (2015), Fakultas Teknologi Kelautan, Jurusan Teknik Sistem Perkapalan, Institut Teknologi Sepuluh Nopember (ITS).

Series Information SKP, Strobl Pumpen, Multi Stage Pumps, Series SKP.

Tahara Haruo1, dan Sularso2, 1991, Pompa dan

kompresor: Pemilihan,Pemakaian dan Pemeliharaan. Penerbit: Pradnya Paramita, Jakarta.

Thoharudin1, Arif Setyo Nugroho2, Stefanus Unjanto3, 2014, Optimasi Tinggi Tekan Dan Efisiensi Pompa Sentrifugal Dengan Perubahan Jumlah Sudu Impeler Dan Sudut-Sudu Keluar Impeler (Β2) Menggunakan Simulasi Computational Fluid Dynamics, Teknologi (SNAST) 2014 Yogyakarta1,2,3Jurusan Teknik Mesin.

Tri Yanto, 2016, Perencanaan Impeller Pompa Sentrifugal dengan Kapasitas 58 liter/detik Head 70 m dengan Putaran 2950 rpm Penggerak Motor Listrik.

Yogi Candra, 2016, Perawatan & Perbaikan Pompa Sentrifugal, Untuk Pemasok Chlorine Pada Sistem Chlorination Plant Pltgu Up Muara Tawar Kabupaten Bekasi, Tugas Akhir, Jurusan Teknik Mesin Politeknik Negeri Padang.




DOI: https://doi.org/10.26905/jtmt.v15i1.4741

Refbacks

  • There are currently no refbacks.


TRANSMISI

Universitas Merdeka Malang

Mailing Address:

Jalan Terusan Dieng 62-64 Malang, 65146, East Java, Indonesia
Phone: 081333961913 Fax: (0341) 560836
Email: [email protected]